RECESSIM - User contributions [en]

Blink SyncModule 2

2023-09-10T16:14:41Z

Hexpwn: /* Teardown pictures */ added new top and bottom layer images

[[File:Photo3.jpg|621x621px|thumb]]
==What is it?==
[[Home]] appliance to control other [[Amazon]] [[Blink]] devices.

According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The [https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs Sync Module 2] requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten [[Blink]] devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

==What can it do?==

*Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
*Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
*Support local video storage for up to 10 Blink cameras.
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).

==Main components==
===Microcontroller===
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">https://www.nxp.com/part/MCIMX6Z0DVM09AB#/</ref>

*[[ARM]] [[Cortex-A7]] running Linux
*900MHz
*SRAM: 128kB
*SPI/UART/I2C
*96KB bootrom, 128KB internal RAM
*Has Arm TrustZone

===Wifi/Bluetooth Module===
[[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987</ref>

*2.4/5Ghz Wifi
*Bluetooth 5.2 (BLE also)

===Serial flash===
[[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV</ref>

*256M-bit
*Dual/Quad SPI XIP (133MHz SPI)

===RAM===
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf</ref>

*1GB SDRAM
*16bit DDR3

===Unknown IC===
Markings: 455A CQRX 220
Unknown purpose. Maybe custom radio.

==Teardown pictures==
<gallery>
File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
File:Photo2.jpg|Back face of the BSM2
File:Photo3.jpg|Top view
File:Photo4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.
File:Photo5.jpg|PCB view (top)
File:Photo6.jpg|PCB view (top) closeup
File:Photo8.jpg|PCB view (bottom)
File:Photo9.jpg|Serial Flash closeup
File:Photo10.jpg|MCU closeup
File:Photo11.jpg|SRAM closeup
File:Unknown ic.png|Unknown IC closeup
File:Photo12.jpg|Wifi/BT module closeup
File:Bottom layer zoom.jpg
File:Sync module 2 top layer zoom.jpg
</gallery>

==Serial Communications==
It is possible to read the boot of the device by connecting to the indicated pin.

Baud rate is 115200.
[[File:Txpin.png|none|frame]]

==References==
<references />

File:Sync module 2 top layer zoom.jpg

2023-09-10T16:13:39Z

Hexpwn:

sync_module_2_top_layer_zoom

Blink SyncModule 2

2023-09-10T16:10:32Z

Hexpwn: (now correctly) fixed reference links

[[File:Photo3.jpg|621x621px|thumb]]
==What is it?==
[[Home]] appliance to control other [[Amazon]] [[Blink]] devices.

According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The [https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs Sync Module 2] requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten [[Blink]] devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

==What can it do?==

*Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
*Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
*Support local video storage for up to 10 Blink cameras.
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).

==Main components==
===Microcontroller===
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">https://www.nxp.com/part/MCIMX6Z0DVM09AB#/</ref>

*[[ARM]] [[Cortex-A7]] running Linux
*900MHz
*SRAM: 128kB
*SPI/UART/I2C
*96KB bootrom, 128KB internal RAM
*Has Arm TrustZone

===Wifi/Bluetooth Module===
[[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987</ref>

*2.4/5Ghz Wifi
*Bluetooth 5.2 (BLE also)

===Serial flash===
[[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV</ref>

*256M-bit
*Dual/Quad SPI XIP (133MHz SPI)

===RAM===
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf</ref>

*1GB SDRAM
*16bit DDR3

===Unknown IC===
Markings: 455A CQRX 220
Unknown purpose. Maybe custom radio.

==Teardown pictures==
<gallery>
File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
File:Photo2.jpg|Back face of the BSM2
File:Photo3.jpg|Top view
File:Photo4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.
File:Photo5.jpg|PCB view (top)
File:Photo6.jpg|PCB view (top) closeup
File:Photo8.jpg|PCB view (bottom)
File:Photo9.jpg|Serial Flash closeup
File:Photo10.jpg|MCU closeup
File:Photo11.jpg|SRAM closeup
File:Unknown ic.png|Unknown IC closeup
File:Photo12.jpg|Wifi/BT module closeup
</gallery>

==Serial Communications==
It is possible to read the boot of the device by connecting to the indicated pin.

Baud rate is 115200.
[[File:Txpin.png|none|frame]]

==References==
<references />

Blink SyncModule 2

2023-09-10T16:09:24Z

Hexpwn: Undo revision 1874 by Hexpwn (talk)

[[File:Photo3.jpg|621x621px|thumb]]
==What is it?==
[[Home]] appliance to control other [[Amazon]] [[Blink]] devices.

According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The [https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs Sync Module 2] requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten [[Blink]] devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

==What can it do?==

*Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
*Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
*Support local video storage for up to 10 Blink cameras.
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).

==Main components==
===Microcontroller===
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">[https://www.nxp.com/part/MCIMX6Z0DVM09AB#/]</ref>

*[[ARM]] [[Cortex-A7]] running Linux
*900MHz
*SRAM: 128kB
*SPI/UART/I2C
*96KB bootrom, 128KB internal RAM
*Has Arm TrustZone

===Wifi/Bluetooth Module===
[[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">[https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987]</ref>

*2.4/5Ghz Wifi
*Bluetooth 5.2 (BLE also)

===Serial flash===
[[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">[https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV]</ref>

*256M-bit
*Dual/Quad SPI XIP (133MHz SPI)

===RAM===
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">[https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf]</ref>

*1GB SDRAM
*16bit DDR3

===Unknown IC===
Markings: 455A CQRX 220
Unknown purpose. Maybe custom radio.

==Teardown pictures==
<gallery>
File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
File:Photo2.jpg|Back face of the BSM2
File:Photo3.jpg|Top view
File:Photo4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.
File:Photo5.jpg|PCB view (top)
File:Photo6.jpg|PCB view (top) closeup
File:Photo8.jpg|PCB view (bottom)
File:Photo9.jpg|Serial Flash closeup
File:Photo10.jpg|MCU closeup
File:Photo11.jpg|SRAM closeup
File:Unknown ic.png|Unknown IC closeup
File:Photo12.jpg|Wifi/BT module closeup
</gallery>

== Serial Communications ==
It is possible to read the boot of the device by connecting to the indicated pin.

Baud rate is 115200.
[[File:Txpin.png|none|frame]]

== References ==
<references />

Blink SyncModule 2

2023-09-10T16:07:18Z

Hexpwn: fixed reference links.

[[File:Photo3.jpg|621x621px|thumb]]
==What is it?==
[[Home]] appliance to control other [[Amazon]] [[Blink]] devices.

According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The [https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs Sync Module 2] requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten [[Blink]] devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

==What can it do?==

*Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
*Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
*Support local video storage for up to 10 Blink cameras.
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).

==Main components==
===Microcontroller===
[[NXP]] MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">https://www.nxp.com/part/MCIMX6Z0DVM09AB#/</ref>

*[[ARM]] [[Cortex-A7]] running Linux
*900MHz
*SRAM: 128kB
*SPI/UART/I2C
*96KB bootrom, 128KB internal RAM
*Has Arm TrustZone

===Wifi/Bluetooth Module===
[[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987</ref>

*2.4/5Ghz Wifi
*Bluetooth 5.2 (BLE also)

===Serial flash===
[[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV</ref>

*256M-bit
*Dual/Quad SPI XIP (133MHz SPI)

===RAM===
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf</ref>

*1GB SDRAM
*16bit DDR3

===Unknown IC===
Markings: 455A CQRX 220
Unknown purpose. Maybe custom radio.

==Teardown pictures==
==Serial Communications==
It is possible to read the boot of the device by connecting to the indicated pin.

Baud rate is 115200.
[[File:Txpin.png|none|frame]]

==References==
<references />

File:Bottom layer zoom.jpg

2023-09-10T16:06:08Z

Hexpwn:

Bottom layer zoom

Blink SyncModule 2

2023-09-06T21:32:02Z

Hexpwn: Added information on serial out.

[[File:Photo3.jpg|621x621px|thumb]]
==What is it?==
[[Home]] appliance to control other [[Amazon]] [[Blink]] devices.

According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The [https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs Sync Module 2] requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten [[Blink]] devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

==What can it do?==

*Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
*Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
*Support local video storage for up to 10 Blink cameras.
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).

==Main components==
===Microcontroller===
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">[https://www.nxp.com/part/MCIMX6Z0DVM09AB#/]</ref>

*[[ARM]] [[Cortex-A7]] running Linux
*900MHz
*SRAM: 128kB
*SPI/UART/I2C
*96KB bootrom, 128KB internal RAM
*Has Arm TrustZone

===Wifi/Bluetooth Module===
[[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">[https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987]</ref>

*2.4/5Ghz Wifi
*Bluetooth 5.2 (BLE also)

===Serial flash===
[[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">[https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV]</ref>

*256M-bit
*Dual/Quad SPI XIP (133MHz SPI)

===RAM===
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">[https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf]</ref>

*1GB SDRAM
*16bit DDR3

===Unknown IC===
Markings: 455A CQRX 220
Unknown purpose. Maybe custom radio.

==Teardown pictures==
<gallery>
File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
File:Photo2.jpg|Back face of the BSM2
File:Photo3.jpg|Top view
File:Photo4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.
File:Photo5.jpg|PCB view (top)
File:Photo6.jpg|PCB view (top) closeup
File:Photo8.jpg|PCB view (bottom)
File:Photo9.jpg|Serial Flash closeup
File:Photo10.jpg|MCU closeup
File:Photo11.jpg|SRAM closeup
File:Unknown ic.png|Unknown IC closeup
File:Photo12.jpg|Wifi/BT module closeup
</gallery>

== Serial Communications ==
It is possible to read the boot of the device by connecting to the indicated pin.

Baud rate is 115200.
[[File:Txpin.png|none|frame]]

== References ==
<references />

File:Txpin.png

2023-09-06T21:30:15Z

Hexpwn:

sync module 2 serial TX pin

Blink SyncModule 2

2023-09-02T00:56:25Z

Hexpwn: Added photo and description of unknown IC.

[[File:Photo3.jpg|621x621px|thumb]]
==What is it?==
[[Home]] appliance to control other [[Amazon]] [[Blink]] devices.

According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The [https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs Sync Module 2] requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten [[Blink]] devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

==What can it do?==

*Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
*Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
*Support local video storage for up to 10 Blink cameras.
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).

==Main components==
===Microcontroller===
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">[https://www.nxp.com/part/MCIMX6Z0DVM09AB#/]</ref>

*[[ARM]] [[Cortex-A7]] running Linux
*900MHz
*SRAM: 128kB
*SPI/UART/I2C
*96KB bootrom, 128KB internal RAM
*Has Arm TrustZone

===Wifi/Bluetooth Module===
[[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">[https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987]</ref>

*2.4/5Ghz Wifi
*Bluetooth 5.2 (BLE also)

===Serial flash===
[[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">[https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV]</ref>

*256M-bit
*Dual/Quad SPI XIP (133MHz SPI)

===RAM===
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">[https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf]</ref>

*1GB SDRAM
*16bit DDR3

===Unknown IC===
Markings: 455A CQRX 220
Unknown purpose. Maybe custom radio.

==Teardown pictures==
<gallery>
File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
File:Photo2.jpg|Back face of the BSM2
File:Photo3.jpg|Top view
File:Photo4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.
File:Photo5.jpg|PCB view (top)
File:Photo6.jpg|PCB view (top) closeup
File:Photo8.jpg|PCB view (bottom)
File:Photo9.jpg|Serial Flash closeup
File:Photo10.jpg|MCU closeup
File:Photo11.jpg|SRAM closeup
File:Unknown ic.png|Unknown IC closeup
File:Photo12.jpg|Wifi/BT module closeup
</gallery>

<references />

File:Unknown ic.png

2023-09-02T00:51:45Z

Hexpwn:

Detail of unknown IC

Blink SyncModule 2

2023-09-02T00:51:02Z

Hexpwn: Added detailed picture and description of one unknown IC.

[[File:Photo3.jpg|621x621px|thumb]]
==What is it?==
[[Home]] appliance to control other [[Amazon]] [[Blink]] devices.

According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The [https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs Sync Module 2] requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten [[Blink]] devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

==What can it do?==

*Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
*Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
*Support local video storage for up to 10 Blink cameras.
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).

==Main components==
===Microcontroller===
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">[https://www.nxp.com/part/MCIMX6Z0DVM09AB#/]</ref>

*[[ARM]] [[Cortex-A7]] running Linux
*900MHz
*SRAM: 128kB
*SPI/UART/I2C
*96KB bootrom, 128KB internal RAM
*Has Arm TrustZone

===Wifi/Bluetooth Module===
[[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">[https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987]</ref>

*2.4/5Ghz Wifi
*Bluetooth 5.2 (BLE also)

===Serial flash===
[[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">[https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV]</ref>

*256M-bit
*Dual/Quad SPI XIP (133MHz SPI)

===RAM===
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">[https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf]</ref>

*1GB SDRAM
*16bit DDR3

==Teardown pictures==
<gallery>
File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
File:Photo2.jpg|Back face of the BSM2
File:Photo3.jpg|Top view
File:Photo4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.
File:Photo5.jpg|PCB view (top)
File:Photo6.jpg|PCB view (top) closeup
File:Photo8.jpg|PCB view (bottom)
File:Photo9.jpg|Serial Flash closeup
File:Photo10.jpg|MCU closeup
File:Photo11.jpg|SRAM closeup
File:Photo13.jpg|Unknown IC closeup
File:Photo12.jpg|Wifi/BT module closeup
</gallery>

<references />

File:Photo13.jpg

2023-09-02T00:49:58Z

Hexpwn:

Unknown IC

Home

2023-09-02T00:33:32Z

Hexpwn: Added Blink SyncModule 2

[[File:Neato XV-11 Disassembled.jpg|thumb|alt=|Neato XV-11 disassembled on the workbench, preparing to reverse engineer LIDAR communication protocol.]]
Cameras, Power/Light Controllers, HVAC Controllers, Electronic Door Locks, Appliances, Robotic Vacuums and other items found in your home.
==Device Index==
[[Neato XV-11]] - Robotic vacuum which included the first low cost [[LIDAR]].

[[Kobalt KRC 40-06]] - 40 volt Lithium Ion Battery Charger

[[Blink SyncModule 2]] - Home appliance to control other Amazon Blink devices.

Blink SyncModule 2

2023-09-02T00:30:50Z

Hexpwn: Added some hyperlinks (for future edits)

[[File:Photo3.jpg|621x621px|thumb]]
==What is it?==
[[Home]] appliance to control other [[Amazon]] [[Blink]] devices.

According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The [https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs Sync Module 2] requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten [[Blink]] devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

==What can it do?==

*Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
*Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
*Support local video storage for up to 10 Blink cameras.
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).

==Main components==
===Microcontroller===
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">[https://www.nxp.com/part/MCIMX6Z0DVM09AB#/]</ref>

*[[ARM]] [[Cortex-A7]] running Linux
*900MHz
*SRAM: 128kB
*SPI/UART/I2C
*96KB bootrom, 128KB internal RAM
*Has Arm TrustZone

===Wifi/Bluetooth Module===
[[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">[https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987]</ref>

*2.4/5Ghz Wifi
*Bluetooth 5.2 (BLE also)

===Serial flash===
[[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">[https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV]</ref>

*256M-bit
*Dual/Quad SPI XIP (133MHz SPI)

===RAM===
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">[https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf]</ref>

*1GB SDRAM
*16bit DDR3

==Teardown pictures==
<gallery>
File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
File:Photo2.jpg|Back face of the BSM2
File:Photo3.jpg|Top view
File:Photo4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.
File:Photo5.jpg|PCB view (top)
File:Photo6.jpg|PCB view (top) closeup
File:Photo8.jpg|PCB view (bottom)
File:Photo9.jpg|Serial Flash closeup
File:Photo10.jpg|MCU closeup
File:Photo11.jpg|SRAM closeup
File:Photo12.jpg|Wifi/BT module closeup
</gallery>

<references />

Blink SyncModule 2

2023-09-02T00:25:07Z

Hexpwn:

[[File:Photo3.jpg|621x621px|thumb]]
==What is it?==
According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The Sync Module 2 requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten Blink devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

==What can it do?==

*Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
*Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
*Support local video storage for up to 10 Blink cameras.
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).

==Main components==
===Microcontroller===
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">[https://www.nxp.com/part/MCIMX6Z0DVM09AB#/]</ref>

*ARM Cortex-A7 running Linux
*900MHz
*SRAM: 128kB
*SPI/UART/I2C
*96KB bootrom, 128KB internal RAM
*Has Arm TrustZone

===Wifi/Bluetooth Module===
NXP 88W8987-NYE2<ref name="NXP 88W8987-NYE2">[https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987]</ref>

*2.4/5Ghz Wifi
*Bluetooth 5.2 (BLE also)

===Serial flash===
Winbond 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">[https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV]</ref>

*256M-bit
*Dual/Quad SPI XIP (133MHz SPI)

===RAM===
ISSI IS43TR16640BL<ref name="ISSI IS43TR16640BL">[https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf]</ref>

*1GB SDRAM
*16bit DDR3

==Teardown pictures==
<gallery>
File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
File:Photo2.jpg|Back face of the BSM2
File:Photo3.jpg|Top view
File:Photo4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.
File:Photo5.jpg|PCB view (top)
File:Photo6.jpg|PCB view (top) closeup
File:Photo8.jpg|PCB view (bottom)
File:Photo9.jpg|Serial Flash closeup
File:Photo10.jpg|MCU closeup
File:Photo11.jpg|SRAM closeup
File:Photo12.jpg|Wifi/BT module closeup
</gallery>

<references />

Blink SyncModule 2

2023-09-02T00:23:48Z

Hexpwn:

[[File:Photo3.jpg|900px|thumb]]
== What is it? ==
According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The Sync Module 2 requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten Blink devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

== What can it do? ==

* Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
* Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
* Support local video storage for up to 10 Blink cameras.
* Record and store motion clips when you insert a USB flash drive (up to 256 GB).

== Main components ==
=== Microcontroller ===
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">[https://www.nxp.com/part/MCIMX6Z0DVM09AB#/]</ref>
* ARM Cortex-A7 running Linux
* 900MHz
* SRAM: 128kB
* SPI/UART/I2C
* 96KB bootrom, 128KB internal RAM
* Has Arm TrustZone

=== Wifi/Bluetooth Module ===
NXP 88W8987-NYE2<ref name="NXP 88W8987-NYE2">[https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987]</ref>
* 2.4/5Ghz Wifi
* Bluetooth 5.2 (BLE also)

=== Serial flash ===
Winbond 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">[https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV]</ref>
* 256M-bit
* Dual/Quad SPI XIP (133MHz SPI)

=== RAM ===
ISSI IS43TR16640BL<ref name="ISSI IS43TR16640BL">[https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf]</ref>
* 1GB SDRAM
* 16bit DDR3

== Teardown pictures ==
<gallery>
Blink_syncmodule2_photo1.jpg|Front face of the BSM2
Photo2.jpg|Back face of the BSM2
Photo3.jpg|Top view
Photo4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.
Photo5.jpg|PCB view (top)
Photo6.jpg|PCB view (top) closeup
Photo8.jpg|PCB view (bottom)
Photo9.jpg|Serial Flash closeup
Photo10.jpg|MCU closeup
Photo11.jpg|SRAM closeup
Photo12.jpg|Wifi/BT module closeup
</gallery>

<references />

File:Photo12.jpg

2023-09-02T00:09:37Z

Hexpwn:

Wifi/BT module closeup

File:Photo11.jpg

2023-09-02T00:09:14Z

Hexpwn:

SRAM closeup

File:Photo10.jpg

2023-09-02T00:08:56Z

Hexpwn:

MCU closeup

File:Photo9.jpg

2023-09-02T00:08:36Z

Hexpwn:

Serial Flash closeup

File:Photo8.jpg

2023-09-02T00:07:54Z

Hexpwn:

Back face of the BSM2 PCB

File:Photo6.jpg

2023-09-02T00:05:39Z

Hexpwn:

PCB view (top) closeup

File:Photo5.jpg

2023-09-02T00:04:51Z

Hexpwn:

Inside the BSM2

File:Photo4.jpg

2023-09-02T00:03:52Z

Hexpwn:

To open up the device just use a spudger, guitar pick, etc. No glue or screws to take the top cover off.

File:Photo3.jpg

2023-09-02T00:02:30Z

Hexpwn:

Top view

File:Photo2.jpg

2023-09-02T00:01:04Z

Hexpwn:

Back face of the BSM2

Blink SyncModule 2

2023-09-01T23:57:51Z

Hexpwn:

== What is it? ==
According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The Sync Module 2 requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten Blink devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]</ref>

== What can it do? ==

* Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
* Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
* Support local video storage for up to 10 Blink cameras.
* Record and store motion clips when you insert a USB flash drive (up to 256 GB).

== Teardown ==
<gallery>
Blink_syncmodule2_photo1.jpg|Caption1
Example.jpg|Caption2
</gallery>

Blink SyncModule 2

2023-09-01T23:55:29Z

Hexpwn: Created page with "== What is it? == According to the manufacturer: "The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system..."

== What is it? ==
According to the manufacturer:
"The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The Sync Module 2 requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten Blink devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."<ref>[ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]

== What can it do? ==

* Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
* Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
* Support local video storage for up to 10 Blink cameras.
* Record and store motion clips when you insert a USB flash drive (up to 256 GB).

== Teardown ==
<gallery>

</gallery>

File:Blink syncmodule2 photo1.jpg

2023-09-01T23:52:50Z

Hexpwn:

Front face of the Blink Sync Module 2