81
edits
Changes
m
→Extract Firmware
<br />
==Extract Firmware==
At some point in the repair attempt, I heard a strange flapping sound from the NOR Flash as I moved the device around. ALL of the pins 25 - 48 had detached from the PCB with zero damage to the traces or pins. I surmise that this was the original failure point of the device - dry joints on the Flash chip.
After I desoldered the other half using hot air, I could proceed to read out the contents -
<br />
=== TL48 Programmer- ===
I used a TL48 programmer with a 48pin TTSOP to read the NOR Flash firmware contents -
The strings are very interesting indeed. Not just a standard 'version' or 'release date' string - they are command strings!
As this device has no screen, a low level diagnostic routine is inferred from their discovery. Looking closely at the last string or two, I was worried that it might be corrupted as there are some missing letters in the string - (ADAT Sync port di onnected and Dectected rather than Detected).
[[File:DIF AT FLASH SETTINGS.png|thumb|T48 programmer settings and dump - note the very interesting strings!]]
<br />
=== Binwalk / Binvis ===
I slowed down a bit here because I had no idea how to actually load the file I'd dumped to look at it. First I used Binwalk, which isn't so well suited to this task. Anyway he was able to provide a nice image showing the entropy of the file - low entropy = low chance of corruption or encryption.
I also had a look in Binvis. Binvis makes for a stunning visual representation even if its not useful in any other way. It was fun to see the strings represented in coloured pixels.