Civil Defense and Fire Siren Controller: Difference between revisions
Add timer switch info and fix oopsies on pinouts that dont match |
m add a linebreak |
||
| Line 355: | Line 355: | ||
Do note however that if you do so, you must cut or desolder the jumper in the W1 position. I am curious if one may replace that jumper with a small switch to allow for choosing between steady and attack/fire signals by bypassing the extra components. | Do note however that if you do so, you must cut or desolder the jumper in the W1 position. I am curious if one may replace that jumper with a small switch to allow for choosing between steady and attack/fire signals by bypassing the extra components. | ||
<gallery> | <gallery> | ||
| Line 437: | Line 438: | ||
---- | ---- | ||
===Relay Driver Module=== | ===Relay Driver Module=== | ||