Atomicdog
Joined 4 May 2024
Projects
Device | Work Plan |
---|---|
CytoFluor 4000 | RE serial data and write new PC software |
Zadi Key lock | Dump FW and RE the CAN bus and RF |
Helios Adv+ | RE device (maybe also PC software) |
CCD camera 600 series | Try and make it work |
Tektronix 2710 | Repair spectrum analyzer |
HV vacuum chamber (ion cleaning?) | RE high voltage RF generator to replace (maybe repair) |
LCD module | RE protocol |
High Voltage stuff | RE to understand the many HV devices and power supplies gotten from auctions |
Cryo Fridge | RE a cryo compressor that was used on helicopters (400hz) |
command | parameters | function | |
---|---|---|---|
RS | reset? | ||
C | Center (seems same as RS) | ||
EM | ### | Position Emission Filter | (for loading) RS\r EM 167\r |
EX | ### | Position Excitation filter | |
L | 0|1 | Lamp control 0=ON 1=OFF | L 0\r |
O | Plate out (eject) | O\r | |
SA | ### ### | Moves plate [F/Back] [L/R] | Plate in: C\r SA 315 1800\r |
P | ? | ||
I | ### | moves plate fwd/back. Light On | ###'s don't seem to do anything |
GL | Returns a number ### | ||
GE | ## | Gets value | Returns: Value at {param} is ####### |
R | Read? | ||
RP | Returns a set ### #### | ||
M | ## | Shake fwd/bk for ~#'s seconds | |
G | ## | ? | |