Mermaid:RE FlowChart Overview

--- config: theme: 'base' themeVariables: primaryColor: '#BB2528' primaryTextColor: '#fff' primaryBorderColor: '#7C0000' lineColor: '#F8B229' secondaryColor: '#006100' tertiaryColor: '#fff' --- flowchart TD subgraph RE_Physical-Analysis [Physical Analysis] direction LR Target_Selection([Target\n Selection]); click Target_Selection "https://www.mediawiki.org" Identify_Components(Identify\n Components); click Identify_Components "/view/Main_Page" Create_Block_Diagram[/Create\n Block\n Diagram/] Contains_Prog_IC{Contains\n Programmable\n IC?} Complete_Documentation([Complete\n Documentation]) End_Phase1((Extract Data)) Target_Selection --> Identify_Components Identify_Components --> Create_Block_Diagram --> Contains_Prog_IC -->|No| Complete_Documentation Contains_Prog_IC -->|Yes| End_Phase1 end subgraph RE_Prog-Extraction [Programmable Device Extraction] direction LR Start_Phase2((Extract Data)) Chip_Locked{Chip\n Locked?} Read_Chip_Memory[/Extract\n Chip\n Memory/] Vulnerability_Exists{Vulnerability\n Exists?} Exploit_Chip(Exploit\n Chip) Find_Vuln(Find\n Vulnerability) Start_Phase2 --> Chip_Locked Chip_Locked -->|No| Read_Chip_Memory Chip_Locked -->|Yes| Vulnerability_Exists Vulnerability_Exists -->|Yes| Exploit_Chip Vulnerability_Exists -->|No| Find_Vuln end subgraph RE_Induced-Fault [Fault Injection Workflow] direction LR subgraph FI_Side-Channel [Side Channel Analysis]; end subgraph FI_Voltage [Voltage Fault Injection]; end subgraph FI_EM [Electromagnetic Fault Injection]; end FI_Side-Channel --> FI_Voltage FI_Side-Channel --> FI_EM end subgraph RE_Microscope-Extraction [Microscope Workflow] direction LR ME_Sample-Preparation(Sample Preparation) subgraph ME_Optical-Extraction [Optical Microscope]; end subgraph ME_Electron-Extraction [Electron Microscope]; end ME_Sample-Preparation --> ME_Optical-Extraction ME_Sample-Preparation --> ME_Electron-Extraction end subgraph RE_Firmware [Firmware Reverse Engineering] direction LR subgraph FW_Tool-Selection [Tool Selection]; end subgraph FW_Tool-Configuration [Tool Configuration]; end subgraph FW_AI-Usage [Using AI]; end subgraph FW_Beginner [Getting Started]; end subgraph FW_Intermediate [Intermediate]; end subgraph FW_Advanced [Advanced Techniques]; end FW_Tool-Selection --> FW_Tool-Configuration --> FW_Beginner --> FW_Intermediate --> FW_Advanced FW_Beginner --> FW_AI-Usage end RE_Physical-Analysis --> RE_Prog-Extraction RE_Prog-Extraction --> RE_Induced-Fault RE_Prog-Extraction --> RE_Microscope-Extraction RE_Induced-Fault --> RE_Firmware RE_Microscope-Extraction --> RE_Firmware

---
config:
  theme: 'base'
  themeVariables:
    primaryColor: '#BB2528'
    primaryTextColor: '#fff'
    primaryBorderColor: '#7C0000'
    lineColor: '#F8B229'
    secondaryColor: '#006100'
    tertiaryColor: '#fff'
---
flowchart TD 
  
  subgraph RE_Physical-Analysis [Physical Analysis]
  direction LR
    Target_Selection([Target\n Selection]); click Target_Selection "https://www.mediawiki.org"
    Identify_Components(Identify\n Components); click Identify_Components "/view/Main_Page"
    Create_Block_Diagram[/Create\n Block\n Diagram/]
    Contains_Prog_IC{Contains\n Programmable\n IC?}
    Complete_Documentation([Complete\n Documentation])
    End_Phase1((Extract Data))
  Target_Selection --> Identify_Components
  Identify_Components --> Create_Block_Diagram --> Contains_Prog_IC -->|No| Complete_Documentation 
  Contains_Prog_IC -->|Yes| End_Phase1
  end
  
  subgraph RE_Prog-Extraction [Programmable Device Extraction]
  direction LR
    Start_Phase2((Extract Data))
    Chip_Locked{Chip\n Locked?}
    Read_Chip_Memory[/Extract\n Chip\n Memory/]
    Vulnerability_Exists{Vulnerability\n Exists?}
    Exploit_Chip(Exploit\n Chip)
    Find_Vuln(Find\n Vulnerability)
  Start_Phase2 --> Chip_Locked
  Chip_Locked -->|No| Read_Chip_Memory
  Chip_Locked -->|Yes| Vulnerability_Exists
  Vulnerability_Exists -->|Yes| Exploit_Chip
  Vulnerability_Exists -->|No| Find_Vuln
  end
  
  subgraph RE_Induced-Fault [Fault Injection Workflow]
  direction LR
    subgraph FI_Side-Channel [Side Channel Analysis]; end
    subgraph FI_Voltage [Voltage Fault Injection]; end
    subgraph FI_EM [Electromagnetic Fault Injection]; end
  FI_Side-Channel --> FI_Voltage
  FI_Side-Channel --> FI_EM
  end
  
  subgraph RE_Microscope-Extraction [Microscope Workflow]
  direction LR
    ME_Sample-Preparation(Sample Preparation)
    subgraph ME_Optical-Extraction [Optical Microscope]; end
    subgraph ME_Electron-Extraction [Electron Microscope]; end
  ME_Sample-Preparation --> ME_Optical-Extraction
  ME_Sample-Preparation --> ME_Electron-Extraction
  end
  
  subgraph RE_Firmware [Firmware Reverse Engineering]
  direction LR
    subgraph FW_Tool-Selection [Tool Selection]; end
    subgraph FW_Tool-Configuration [Tool Configuration]; end
    subgraph FW_AI-Usage [Using AI]; end    
    subgraph FW_Beginner [Getting Started]; end
    subgraph FW_Intermediate [Intermediate]; end
    subgraph FW_Advanced [Advanced Techniques]; end
  FW_Tool-Selection --> FW_Tool-Configuration --> FW_Beginner --> FW_Intermediate --> FW_Advanced
  FW_Beginner --> FW_AI-Usage
  end

RE_Physical-Analysis --> RE_Prog-Extraction
RE_Prog-Extraction --> RE_Induced-Fault
RE_Prog-Extraction --> RE_Microscope-Extraction
RE_Induced-Fault --> RE_Firmware
RE_Microscope-Extraction --> RE_Firmware