73
edits
Changes
File:Roti rotimatic under rear cover.jpg (view source)
Revision as of 05:29, 7 September 2024
, 7 SeptemberOpening rear cover after popping plastic latches and removing T20 screw from bottom. Fan wiring passes to connector on top of main board, one of two. Upper board with 5 wires is external USB connector, presumably for thumb stick to reflash firmware. 2 wire AC mains, brown and blue with ferrites. Not shown reset-able 2 prong plug for connecting to outlet.
== Summary ==
Opening rear cover after popping plastic latches and removing T20 screw from bottom.
Fan wiring passes to connector on top of main board, one of two. Upper board with 5 wires is external USB connector, presumably for thumb stick to reflash firmware. 2 wire AC mains, brown and blue with ferrites. Not shown reset-able 2 prong plug for connecting to outlet.
== Licensing ==
{{self|cc-by-sa-4.0}}
Opening rear cover after popping plastic latches and removing T20 screw from bottom.
Fan wiring passes to connector on top of main board, one of two. Upper board with 5 wires is external USB connector, presumably for thumb stick to reflash firmware. 2 wire AC mains, brown and blue with ferrites. Not shown reset-able 2 prong plug for connecting to outlet.
== Licensing ==
{{self|cc-by-sa-4.0}}