123
edits
Changes
GE Medical Flashpad Digital Xray Detector (view source)
Revision as of 10:54, 11 June 2026
, Yesterday at 10:54removed links of some words
== Overview ==
The '''GE Flashpad''' is a [[Digital Radiography]] image sensor from approximately 2010, originally used in the '''GE Optima 220AMX''' mobile X-ray unit. It was designed to replace analog film in radiology, dramatically reducing image acquisition time from hours to seconds.
Due to its high original cost and specialized application, used units occasionally appear on professional B2B marketplaces in the $15,000–$50,000 range. On eBay, prices typically fall between $1,500 and $5,000, though units at this price point are often in poor condition and may fail the built-in self-test or not function at all.
{{Note|[[Artificial intelligence|AI]] assistance was used in writing this page for improved formatting and readability, as well as in the process of finding information, testing, and analyzing firmware dumps and backups.}}
== Technical Specifications ==
The Flashpad uses a '''~40 × 40 cm [[Caesium iodide|CsI]] scintillator''' bonded to a [[Thin-film transistor|TFT]] photodetector array mounted on glass. The assembly is highly sensitive to shock and impact damage.
{| class="wikitable"
|-
! Parameter !! Value
|-
| Resolution || 2048 × 2048 px
|-
| Bit depth || 16-bit per pixel
|-
| Spatial resolution || Up to 5 lp/mm (theoretical)
|-
| Scintillator material || Caesium iodide (CsI)
|-
| Detector type || TFT photodetector array (glass substrate)
|-
| Panel size || ~40 × 40 cm
|}
The theoretical 5 lp/mm spatial resolution is primarily limited in practice by the focal spot size of the X-ray source. Use of an [[anti-scatter grid]] can improve effective resolution.
== Hardware Features ==
=== Shock logging ===The unit contains an internal [[accelerometer]] that logs significant shock events — but only when a battery is inserted. As there is no backup battery, shock events occurring while unpowered are not recorded.
=== Wireless connectivity ===Some units include a [[Ultra-wideband|UWB]] transmitter for Wireless USB; others may be equipped with a [[Wi-Fi]] module instead. The detector can also be operated over the tethered connection alone.
=== Ethernet interface ===Exposed metal contacts on the bottom connector are isolated via relays by default. Enabling [[Gigabit Ethernet]] connectivity requires shorting or driving two specific pins. This has not been investigated further at this time.