Landis+Gyr Residential Meter

Early Generation Dual Board based on M16C processor

• 

  Dual board meter, older design, brain/network board top

• 

  Dual board meter, older design, brain/network board bottom

• 

  Dual board meter, older design, metering board top

• 

  Dual board meter, older design, metering board bottom

---

Generation 4 based on M16C processor

• 

  Blank PCB Components side

• 

  Blank PCB Screen and Buttons side

• 

  Component side ground plane and traces sanded off

• 

  Component side ground plane and screen side sanded off

• 

  Screen side ground plane

• 

  Screen side ground plane sanded off showing internal layer traces

• 

  PCB with EM250 Zigbee chip and lower accuracy Teridian chip

• 

  PCB with EM357 Zigbee chip and higher accuracy Teridian chip

---

Generation 5 smart meter based on ARM Cortex-M processor (FCCID R7PEG1R1S6)

• 

  Top of Gen5 meter board with LCD screen

• 

  Top of Gen5 meter board with the LCD screen removed

• 

  Bottom of Gen5 meter board, ATSAM4C32 processor is under the large brown capacitor seen in the bottom middle of the PCB.

• 

  Red circled spots are missing 0 ohm resistors you need to solder bridge to enable JTAG connector to function.