73
edits
Changes
Jump to navigation
Jump to search
→Firmware: REPL
>>>
</pre>
There's various ways you can now access the device, including over WiFi once configured. I highly recommend <code>rshell</code> which provides ability to copy and move files as well as directly write and debug code using REPL. If you don't pass any arguments it will automatically attempt to connect, if you have multiple devices you can also specify the connection parameters. Here the built in USB/Serial interface connected via <code>D+/D-</code> is being used.
<pre>
rshell -p /dev/ttyACM0 -b 115200
Using buffer-size of 256
Connecting to /dev/ttyACM0 (buffer-size 256)...
Trying to connect to REPL connected
Retrieving sysname ... esp32
Testing if ubinascii.unhexlify exists ... Y
Retrieving root directories ... /boot.py/ /main.py/
Setting time ... Sep 26, 2024 09:42:01
Evaluating board_name ... pyboard
Retrieving time epoch ... Jan 01, 2000
Welcome to rshell. Use Control-D (or the exit command) to exit rshell.
</pre>
Once launched, any running code may be halted, entering <code>repl</code> will give an interactive Micropython prompt. Entering <code>Ctrl+D</code> will do a soft reset and any code configured to automatically start such as <code>main.py</code> will then run and you will see any output such as from <code>print()</code> in the terminal.
