Difference between revisions of "Gr-smart meters Setup Guide"

From RECESSIM, A Reverse Engineering Community
Jump to navigation Jump to search
Line 1: Line 1:
 
The following install guide details the steps from a fresh Ubuntu 20.04 install to a fully running GNU Radio + USRP B200 frequency hopping spread spectrum setup needed to capture smart meter data. The guide will be updated/broken out as additional SDR's like the HackRF and RTL-SDR are added.
 
The following install guide details the steps from a fresh Ubuntu 20.04 install to a fully running GNU Radio + USRP B200 frequency hopping spread spectrum setup needed to capture smart meter data. The guide will be updated/broken out as additional SDR's like the HackRF and RTL-SDR are added.
  
=== Install Ubuntu 20.04 ===
+
===Install Ubuntu 20.04===
 
There is nothing special about Ubuntu, it was chosen because it works well across different computers and has a familiar interface. Likely these instructions can be used as a rough guide for what is needed with other distro's.
 
There is nothing special about Ubuntu, it was chosen because it works well across different computers and has a familiar interface. Likely these instructions can be used as a rough guide for what is needed with other distro's.
  
 
For now, this step is to install a base version of Ubuntu 20.04, mine was a minimal install. After finishing your install ensure you update everything.
 
For now, this step is to install a base version of Ubuntu 20.04, mine was a minimal install. After finishing your install ensure you update everything.
  
<code>sudo apt update</code>
+
<syntaxhighlight lang="bash">
 
 
<code>sudo apt upg</code><syntaxhighlight lang="bash">
 
 
sudo apt update
 
sudo apt update
 
sudo apt upgrade
 
sudo apt upgrade
</syntaxhighlight><code>rade</code>
+
</syntaxhighlight>
 +
 
 +
<br />

Revision as of 16:10, 25 April 2021

The following install guide details the steps from a fresh Ubuntu 20.04 install to a fully running GNU Radio + USRP B200 frequency hopping spread spectrum setup needed to capture smart meter data. The guide will be updated/broken out as additional SDR's like the HackRF and RTL-SDR are added.

Install Ubuntu 20.04

There is nothing special about Ubuntu, it was chosen because it works well across different computers and has a familiar interface. Likely these instructions can be used as a rough guide for what is needed with other distro's.

For now, this step is to install a base version of Ubuntu 20.04, mine was a minimal install. After finishing your install ensure you update everything.

sudo apt update
sudo apt upgrade