59
edits
Changes
→ST7 Programming: Started theory of operation section
The ST7 can be programmed using the RLINK-STD programmer. This programmer is available from Digi-Key https://www.digikey.com/en/products/detail/iotize/RLINK-STD/9923059
=== FlashBash Programmer ===
The FlashBash ST7 programmer claims to be able to program the ST7 on the LMS-6. This has not been evaluated yet. http://www.spen-soft.co.uk/
FlashBash V3 PCB can be ordered from DirtyPCBs.com: https://dirtypcbs.com/store/designer/details/1826/6489/flashbash-v3-st7-programmer
=== LMS-6 Card Edge Interface ===
LMS-6 Card edge interface board KiCad schematic and board layout: https://github.com/Reid-n0rc/LMS-6_Interface_Board
|}
==== Interface Description and Theory of Operation ====
The LMS-6 interface PCB allows the LMS-6 to be powered, connect to USB to UART, and connect to an in circuit programmer through the card edge connector.
===== Power =====
===== USB to UART =====
===== In Circuit Programming =====
<br />
==Reference==
Here are some reference materials. This is an initial population of material, and this section will need significant cleanup - putting links up for now.