Difference between revisions of "File:Ge flashpad bottom connector ethernet isolation pcb.jpg"

Latest revision as of 11:40, 11 June 2026

isolation pcb for bottom interface

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	11:40, 11 June 2026		4,032 × 3,024 (2.36 MB)	Gamerpaddy (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	ANT DAO TECHNOLOGY LIMITED
Camera model	Raptor
ISO speed rating	2,315
F Number	f/1.88
Exposure time	50,063/1,000,000 sec (0.050063)
Lens focal length	5.59 mm
Date and time of data generation	14:07, 10 June 2026
Width	4,032 px
Height	3,024 px
Software used	MediaTek Camera Application
Orientation	Normal
File change date and time	14:07, 10 June 2026
Y and C positioning	Co-sited
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Exposure Program	Not defined
DateTimeDigitized subseconds	616
DateTimeOriginal subseconds	616
DateTime subseconds	616
Flash	Flash did not fire, compulsory flash suppression
Light source	Other light source
Metering mode	Center weighted average
Scene capture type	Standard
Focal length in 35 mm film	0 mm
Maximum land aperture	0 APEX (f/1)
Date and time of digitizing	14:07, 10 June 2026
APEX exposure bias	0
Digital zoom ratio	1.54
White balance	Auto white balance
APEX brightness	2.8
Exposure mode	Auto exposure
Meaning of each component	Y Cb Cr does not exist
Color space	sRGB
APEX shutter speed	4.247
Exif version	2.2
Supported Flashpix version	0,100