Landis+Gyr Residential Meter

Landis+Gyr Meter Examples

Early Generation Dual Board based on M16C processor

• 
  Dual board meter, older design, brain/network board top
• 
  Dual board meter, older design, brain/network board bottom
• 
  Dual board meter, older design, metering board top
• 
  Dual board meter, older design, metering board bottom

---

Generation 4 based on M16C processor

• 
  Blank PCB Components side
• 
  Blank PCB Screen and Buttons side
• 
  Component side ground plane and traces sanded off
• 
  Component side ground plane and screen side sanded off
• 
  Screen side ground plane
• 
  Screen side ground plane sanded off showing internal layer traces
• 
  PCB with EM250 Zigbee chip and lower accuracy Teridian chip
• 
  PCB with EM357 Zigbee chip and higher accuracy Teridian chip

---

Generation 5 smart meter based on ARM Cortex-M processor (FCCID R7PEG1R1S6)

• 
  Top of Gen5 meter board with LCD screen
• 
  Top of Gen5 meter board with the LCD screen removed
• 
  Bottom of Gen5 meter board, ATSAM4C32 processor is under the large brown capacitor seen in the bottom middle of the PCB.
• 
  Red circled spots are missing 0 ohm resistors you need to solder bridge to enable JTAG connector to function.