Difference between revisions of "Landis+Gyr Integrated WanGate Radio (IWR)"

Revision as of 23:15, 14 August 2021

Metricom Utilinet IWR Series II
Radio fully disassembled
Internal view of case, notice surge suppressors bolted to the left side of the case.
EEPROM for code storage and jumpers, JP2 used to enter test mode.
Radio transmitter/receiver board. Separate components used to build up RF circuit, replaced by single transceiver IC's in newer devices.

Cellnet Technology Gridstream Series 4
Smaller antenna connector than Series II radio, power connector moved to the other end of the case.
Much smaller than Series II radio, more powerful processor and radio now uses single transceiver IC with increased transmission power.
They still stick with a single sided PCB for component placement, same as Series II radio.

@@ Line 1: / Line 1: @@
-=== Series 2 Radio ===
+===Series 2 Radio===
 <gallery>
 File:Metricom Utilinet IWR Series II - Case External.jpg|Metricom Utilinet IWR Series II
@@ Line 9: / Line 9: @@
-=== Series 4 Radio ===
+===Series 4 Radio===
 <gallery>
-File:LandisGyrWangateRadio1.JPG
+File:LandisGyrWangateRadio1.JPG| Cellnet Technology Gridstream Series 4
-File:LandisGyrWangateRadio2.JPG
+File:LandisGyrWangateRadio2.JPG| Smaller antenna connector than Series II radio, power connector moved to the other end of the case.
-File:LandisGyrWangateRadio3.JPG
+File:LandisGyrWangateRadio3.JPG| Much smaller than Series II radio, more powerful processor and radio now uses single transceiver IC with increased transmission power.
-File:LandisGyrWangateRadio4.JPG
+File:LandisGyrWangateRadio4.JPG| They still stick with a single sided PCB for component placement, same as Series II radio.
 </gallery>