LMS-6 Radiosonde: Difference between revisions
Paul Rixon (talk | contribs) SP1 connection endpoints |
Paul Rixon (talk | contribs) →Connectors: SENS1 mapped to endpoints |
||
| Line 38: | Line 38: | ||
|- | |- | ||
|1 | |1 | ||
| +5V (5.47 measured) | | +5V (5.47 measured) - From U25 | ||
|- | |- | ||
|2 | |2 | ||
|GND | |GND | ||
|- | |- | ||
|3 | |3 | ||
| | |U3 Pin 37 (PA7, High Sink/20mA) | ||
|- | |- | ||
|4 | |4 | ||
|1 Hz | |1 Hz - U14 Pin 9 (S2) | ||
|- | |- | ||
|5 | |5 | ||
|1 Hz | |1 Hz - U14 Pin 11 (S1) | ||
|- | |- | ||
|6 | |6 | ||
|1 Hz | |1 Hz - U14 Pin 11 (S0) | ||
|- | |- | ||
|7 | |7 | ||
|GND | |Pulldown via R41 (47k) to GND | ||
|} | |} | ||
Public information shows this header | Public information shows this header may be used for adding additional analog sensors to the radiosonde. | ||
{| class="wikitable" | {| class="wikitable" | ||
|+SENS2 - Humidity | |+SENS2 - Humidity | ||