Gr-smart meters Setup Guide: Difference between revisions
Created page with "Insert instructions for setting up Frequency Hopping Spread Spectrum capture in GNU Radio." |
No edit summary |
||
| Line 1: | Line 1: | ||
The following install guide details the steps from a fresh Ubuntu 20.04 install to a fully running GNU Radio + USRP B200 frequency hopping spread spectrum setup needed to capture smart meter data. The guide will be updated/broken out as additional SDR's like the HackRF and RTL-SDR are added. | |||
=== Install Ubuntu 20.04 === | |||
There is nothing special about Ubuntu, it was chosen because it works well across different computers and has a familiar interface. Likely these instructions can be used as a rough guide for what is needed with other distro's. | |||
For now, this step is to install a base version of Ubuntu 20.04, mine was a minimal install. After finishing your install ensure you update everything. | |||
<code>sudo apt update</code> | |||
<code>sudo apt upg</code><syntaxhighlight lang="bash"> | |||
sudo apt update | |||
sudo apt upgrade | |||
</syntaxhighlight><code>rade</code> | |||