Difference between revisions of "Landis+Gyr Residential Meter"
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
| − | Generation 4 and older boards based on M16C processor<gallery mode="packed" heights="200"> | + | === Generation 4 and older boards based on M16C processor === |
| + | <gallery mode="packed" heights="200"> | ||
File:LandisGyr PCB Blank1.JPG|Blank PCB Components side | File:LandisGyr PCB Blank1.JPG|Blank PCB Components side | ||
File:LandisGyr PCB Blank2.JPG|Blank PCB Screen and Buttons side | File:LandisGyr PCB Blank2.JPG|Blank PCB Screen and Buttons side | ||
| Line 9: | Line 10: | ||
File:LandisGyr PWB-72127 RevA Top.JPG|Dual board meter, older design, metering board bottom | File:LandisGyr PWB-72127 RevA Top.JPG|Dual board meter, older design, metering board bottom | ||
</gallery> | </gallery> | ||
| − | ----<gallery mode="packed" heights="200"> | + | ---- |
| + | |||
| + | === Generation 5 smart meter based on ARM Cortex-M processor === | ||
| + | <gallery mode="packed" heights="200"> | ||
File:LandisGyr PCB 24-2411 RevAC TopScreen.JPG|Top of Gen5 meter board with LCD screen | File:LandisGyr PCB 24-2411 RevAC TopScreen.JPG|Top of Gen5 meter board with LCD screen | ||
File:LandisGyr PCB 24-2411 RevAC TopNoScreen.JPG|Top of Gen5 meter board with the LCD screen removed | File:LandisGyr PCB 24-2411 RevAC TopNoScreen.JPG|Top of Gen5 meter board with the LCD screen removed | ||
Revision as of 00:23, 18 April 2022
Generation 4 and older boards based on M16C processor
Blank PCB Components side
Blank PCB Screen and Buttons side
PCB with EM250 Zigbee chip and lower accuracy Teridian chip
PCB with EM357 Zigbee chip and higher accuracy Teridian chip
Dual board meter, older design, brain/network board top
Dual board meter, older design, brain/network board bottom
Dual board meter, older design, metering board top
Dual board meter, older design, metering board bottom
Generation 5 smart meter based on ARM Cortex-M processor
Top of Gen5 meter board with LCD screen
Top of Gen5 meter board with the LCD screen removed
Bottom of Gen5 meter board, ATSAM4C32 processor is under the large brown capacitor seen in the bottom middle of the PCB.
Red circled spots are missing 0 ohm resistors you need to solder bridge to enable JTAG connector to function.
