Difference between revisions of "MT174"
Jump to navigation
Jump to search
m |
m |
||
| Line 23: | Line 23: | ||
[[File:ISKRA LOG.png|thumb|FIFO logbook P.98.1 for 74 "possible misuse type events"]] | [[File:ISKRA LOG.png|thumb|FIFO logbook P.98.1 for 74 "possible misuse type events"]] | ||
| − | [https:// | + | [https://www.avu-netz.de/downloads/messwesen/anleitung_mt174_1_kurzanleitung.pdf Manual (short)] |
[https://www.manualslib.de/manual/417563/Iskraemeco-Mt174.html?page=33#manual Manual] | [https://www.manualslib.de/manual/417563/Iskraemeco-Mt174.html?page=33#manual Manual] | ||
Revision as of 21:18, 8 March 2024
ISKRA MT174
ISKRA MT174 (230/400V, rated 85A) mostly used in Saxonia this seems to have some noticable semaphores wich can be visualy inspected:
KD = lid/cover open (there must be a switch somewhere) BAT = internal battery low DÜ = transmission mode FF = "Fatal" counter (?) SET = counter in program mode
The IR-Interface is claimed to be IEC 62056-21 mode C (asynchron, half-duplex, 300 - 19.200 baud, 7bit, even parity, 1stop (1_7D_1P_E_1S) and it is bidirectional. So one can also send something over that interface. There's an optional RS485 wire interface on some models.
The "Fatal counter" is a hex value 8bit flag register:
0 = Firmware error 1 = Counter parameter checksum error 2 = energy/maximum checksum error 3 = not used 4 = not used 5 = not used 6 = maintenance warning level (?) 7 = not used
