Difference between revisions of "Ting"

From RECESSIM, A Reverse Engineering Community
Jump to navigation Jump to search
(Initial start of page, should be under Home devices)
 
Line 8: Line 8:
 
Plastic shell with a button on the lower-left edge and LED indicator in the center of the lower black portion. Plugs into a USA 120V 3-prong outlet.
 
Plastic shell with a button on the lower-left edge and LED indicator in the center of the lower black portion. Plugs into a USA 120V 3-prong outlet.
 
[[File:Bottom popped.jpg|thumb|Bottom of device, notch in inner (top) half]]
 
[[File:Bottom popped.jpg|thumb|Bottom of device, notch in inner (top) half]]
 
+
[[File:deviceLabel.jpg|thumb|Back of device, with label]]
 +
[[File:RightSide popped.jpg|thumb]]
 +
[[File:DeviceOpened.jpg|thumb|Note the antenna on front, don't yank it apart!]]
 +
[[File:PCBfront.jpg|thumb|There is one main PCB, soldered to the 120V blades]]
 +
[[File:ISM4343Focus.jpg|thumb|ISM4343 module]]
 +
[[File:LPCfocus.jpg|thumb|LPC MCU and level shifter in focus]]
  
 
The back half overlaps the front half. There are three notches with clips on each side, and one on top, one on bottom. Prying these popped it apart.
 
The back half overlaps the front half. There are three notches with clips on each side, and one on top, one on bottom. Prying these popped it apart.
<br />
 

Revision as of 18:05, 15 April 2025

Received one by signing up on State Farm for free. Not sure if I want to actually use it, especially when linked to home insurance.

You can buy one on eBay, because they have a subscription, so I suppose many people don't want them any more.


Hardware

Plastic shell with a button on the lower-left edge and LED indicator in the center of the lower black portion. Plugs into a USA 120V 3-prong outlet.

Bottom of device, notch in inner (top) half
Back of device, with label
RightSide popped.jpg
Note the antenna on front, don't yank it apart!
There is one main PCB, soldered to the 120V blades
ISM4343 module
LPC MCU and level shifter in focus

The back half overlaps the front half. There are three notches with clips on each side, and one on top, one on bottom. Prying these popped it apart.