Blink SyncModule 2: Difference between revisions

← Older edit Newer edit →

VisualWikitext

@@ Line 14: / Line 14: @@
 *Record and store motion clips when you insert a USB flash drive (up to 256 GB).
-==Main components==
+==Main components ==
-===Microcontroller===
+The Blink Sync Module 2 has 2 documented board types, they can easily be identified by the microprocessor being mounted on the bottom or top of the PCB, if the chip is on the bottom board rev = A0 Blink board.
+=== Amazon Board ===
+====Microcontroller====
 NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">https://www.nxp.com/part/MCIMX6Z0DVM09AB#/</ref>
@@ Line 25: / Line 29: @@
 *Has Arm TrustZone
-===Wifi/Bluetooth Module===
+====Wifi/Bluetooth Module====
 [[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987</ref>
@@ Line 31: / Line 35: @@
 *Bluetooth 5.2 (BLE also)
-===Serial flash===
+====Serial flash====
 [[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV</ref>
@@ Line 37: / Line 41: @@
 *Dual/Quad SPI XIP (133MHz SPI)
-===RAM===
+====RAM====
 [[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf</ref>
@@ Line 43: / Line 47: @@
 *16bit DDR3
-===Sub-GHz "EZRadio" Transceiver===
+====Sub-GHz "EZRadio" Transceiver====
+Markings: 455A CQRX 220
+Silicon Labs Si4455<ref name=":0">https://www.silabs.com/documents/public/data-sheets/Si4455.pdf</ref>
+*Frequency of 283–960 MHz
+*–116 dBm Sensitivity
+*Modulation:
+**(G)FSK
+**OOK
+*+13 dBm Max output power
+*50 nA Standby Current
+*500 kbps Max Data Rate
+*1.8 to 3.6 VDC <br />
+=== Rev A0 Blink Board ===
+====Microcontroller====
+[[Atheros]] AR9331 rev 1 (MIPS 24Kc @ 400MHz)
+====Wifi Module====
+Onboard [[Atheros]] AR9331
+====Serial flash====
+[[Winbond]] 25Q64
+====RAM====
+[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL" />
+*64mb DDR2 16 bit
+====Sub-GHz "EZRadio" Transceiver====
 Markings: 455A CQRX 220
-Silicon Labs Si4455<ref>https://www.silabs.com/documents/public/data-sheets/Si4455.pdf</ref>
+Silicon Labs Si4455<ref name=":0" />
+*Frequency of 283–960 MHz
+*–116 dBm Sensitivity
+*Modulation:
+**(G)FSK
+**OOK
+*+13 dBm Max output power
+*50 nA Standby Current
+*500 kbps Max Data Rate
+*1.8 to 3.6 VDC
-* Frequency of 283–960 MHz
+==Teardown pictures ==
-* –116 dBm Sensitivity
-* Modulation:
-** (G)FSK
-** OOK
-* +13 dBm Max output power
-* 50 nA Standby Current
-* 500 kbps Max Data Rate
-* 1.8 to 3.6 VDC
-==Teardown pictures==
+==== Amazon Board ====
 <gallery>
 File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
@@ Line 74: / Line 111: @@
 File:Bottom layer zoom.jpg
 File:Sync module 2 top layer zoom.jpg
+</gallery><br />
+==== Rev A0 - Blink Board ====
+<gallery>
+File:Blink-sync-module-2-shell.jpg|Outer shell
+File:Blink Sync Module 2 - rev a0 - Pins.png|Labelled Pins, TM1 = RX, TM2 = TX, TM3 = GND
+File:Blink sync module 2 PCB (top) - rev a0.jpg|Top face
+File:Blink Sync Module 2 PCB (bottom) - Rev A0.jpg|Bottom face
 </gallery>
@@ Line 80: / Line 125: @@
 Baud rate is 115200.
-[[File:Txpin.png|none|frame]]
+==== Amazon Board ====
+[[File:Txpin.png|none|frame]]<br />
+==== Rev A0 - Blink Board ====
+TM2 for reading UART
+<br />
+[[File:Blink Sync Module 2 - rev a0 - Pins.png|thumb|TM2 = TX]]
+<br />
 ==References==
 <references />