Open main menu

File:Roti rotimatic under rear cover.jpg

Revision as of 05:29, 7 September 2024 by -.-6eau (talk | contribs) (Opening rear cover after popping plastic latches and removing T20 screw from bottom. Fan wiring passes to connector on top of main board, one of two. Upper board with 5 wires is external USB connector, presumably for thumb stick to reflash firmware. 2 wire AC mains, brown and blue with ferrites. Not shown reset-able 2 prong plug for connecting to outlet.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Original file(3,008 × 4,000 pixels, file size: 5.97 MB, MIME type: image/jpeg)

Summary

Opening rear cover after popping plastic latches and removing T20 screw from bottom. Fan wiring passes to connector on top of main board, one of two. Upper board with 5 wires is external USB connector, presumably for thumb stick to reflash firmware. 2 wire AC mains, brown and blue with ferrites. Not shown reset-able 2 prong plug for connecting to outlet.

Licensing

Template:Self

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current05:29, 7 September 2024Thumbnail for version as of 05:29, 7 September 20243,008 × 4,000 (5.97 MB)-.-6eau (talk | contribs)Opening rear cover after popping plastic latches and removing T20 screw from bottom. Fan wiring passes to connector on top of main board, one of two. Upper board with 5 wires is external USB connector, presumably for thumb stick to reflash firmware. 2 wire AC mains, brown and blue with ferrites. Not shown reset-able 2 prong plug for connecting to outlet.

The following page uses this file:

Metadata