Changes

*<code>Snap=[Yes/No]</code> - Enable snapshot mode

[[File:Dali D8X3N Raw Thermal viewer.png|thumb|Raw Data Viewer in python]]

rev3 and onward will only be available directly as a Webpage on the Device (see below).

It is also possible to use the Raw viewer directly in the browser.

<br />

<br />

===Flash Contents===

To control the TIM you can either use Pelco or Dali command set. By default the Dali commandset is used at 38400 BAUD.

The secret menus Main and System can be openend with the password '''+-MC+-'''

<br />

[[File:Dali D8X3C Breakout board.png|thumb|Breakout board for D8X3C ]]

to use it, you need to interface it directly.

<br />

[[File:Dali DLD384 Sensor pinout basic.png|thumb|basic pinout of a DLD384]]

the pinout of the thermal sensor havent been analyzes much.