29
edits
Changes
no edit summary
[[File:Photo3.jpg|900px|thumb]]
== What is it? ==
According to the manufacturer:
* Record and store motion clips when you insert a USB flash drive (up to 256 GB).
== Main components ===== Microcontroller ===NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">[https://www.nxp.com/part/MCIMX6Z0DVM09AB#/]</ref>* ARM Cortex-A7 running Linux* 900MHz * SRAM: 128kB* SPI/UART/I2C* 96KB bootrom, 128KB internal RAM* Has Arm TrustZone === Wifi/Bluetooth Module ===NXP 88W8987-NYE2<ref name="NXP 88W8987-NYE2">[https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987]</ref>* 2.4/5Ghz Wifi* Bluetooth 5.2 (BLE also) === Serial flash ===Winbond 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">[https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV]</ref>* 256M-bit* Dual/Quad SPI XIP (133MHz SPI) === RAM ===ISSI IS43TR16640BL<ref name="ISSI IS43TR16640BL">[https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf]</ref>* 1GB SDRAM* 16bit DDR3 == Teardown pictures ==
<gallery>
Blink_syncmodule2_photo1.jpg|Caption1Front face of the BSM2ExamplePhoto2.jpg|Caption2Back face of the BSM2Photo3.jpg|Top viewPhoto4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.Photo5.jpg|PCB view (top)Photo6.jpg|PCB view (top) closeupPhoto8.jpg|PCB view (bottom)Photo9.jpg|Serial Flash closeupPhoto10.jpg|MCU closeupPhoto11.jpg|SRAM closeupPhoto12.jpg|Wifi/BT module closeup
</gallery>
<references />