File:Roti rotimatic mixing gears motors pumps tubes load cell.jpg

From RECESSIM, A Reverse Engineering Community
Revision as of 06:53, 7 September 2024 by -.-6eau (talk | contribs) (Removal of upper mixer assembly with attached DC motor and two pumps. Motor with lower limit switch and ir sensor on left. Center is a load cell with inscription "10" connected to series of gears driven by horizontally mounted motor. Two tubes from pump connect with spring clips and load cell PCB.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file(4,000 × 3,008 pixels, file size: 6.64 MB, MIME type: image/jpeg)

Summary

Removal of upper mixer assembly with attached DC motor and two pumps. Motor with lower limit switch and ir sensor on left. Center is a load cell with inscription "10" connected to series of gears driven by horizontally mounted motor. Two tubes from pump connect with spring clips and load cell PCB.

Licensing

Template:Self

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current06:53, 7 September 2024Thumbnail for version as of 06:53, 7 September 20244,000 × 3,008 (6.64 MB)-.-6eau (talk | contribs)Removal of upper mixer assembly with attached DC motor and two pumps. Motor with lower limit switch and ir sensor on left. Center is a load cell with inscription "10" connected to series of gears driven by horizontally mounted motor. Two tubes from pump connect with spring clips and load cell PCB.

The following page uses this file:

Metadata