1,383
edits
Changes
B&G International Decapsulator Model 250 (view source)
Revision as of 03:41, 26 June 2020
, 03:41, 26 June 2020no edit summary
This image from the book "Product Integrity and Reliability in Design" appears to be a schematic of the Model 250.<br />[[File:John W. Evans, Jillian Y. Evans, Dong-su Ryu (auth.), John W. Evans, Jillian Y. Evans (eds.) - Product Integrity and Reliability in Design-Springer-Verlag London (2001).jpg]]<br />---- == Acid Etching Unit ==<gallery mode="packed" heights="200">
File:BG International Decapsulator Model 250.png|Decapsulator on the left and control box on the right. Control box contains all microprocessors and control logic.
File:BG Model 250 Front.JPG|Decapsulator with top and side covers removed.
File:BG Model 250 Side 1 Vent Valve.JPG|Pressure relief valve used to release pressure in the chamber. Pressure is vented out to the waste acid capture container. This container must not be sealed unlike the fresh acid containers which are sealed.
File:BG Model 250 Side 2 Cylinder Valve.JPG|Close up picture of the valve used to control the large cylinder that lifts/lowers the chamber lid.
</gallery>---- == Control Unit == <br />
*