Changes

Kobalt KRC 40-06 (view source)

Revision as of 03:25, 2 August 2023

84 bytes added , 03:25, 2 August 2023

== Troubleshooting ==

If the input fuse has blown, the problem is probably in the input side. Perhaps the 180 uF/250V capacitor shorted. Perhaps the inductor, bridge rectifier diode pack shorted.

~~<big>**Caution**</big>~~

~~120 VAC and up to 175 volts DC are present on the input side of the charger circuit.~~

<big>**WARNING**</big> 120 VAC and up to 175 volts DC are present on the input side of the charger circuit. Under a bad set of circumstances, this could be lethal.*Proceed at your own risk!* If you're comfortable proceeding, then plug in to AC power. With the multimeter, look for the DC voltages indicated in the pictures.

== Autopsy ==

Shawnerz

Writers

19

edits