Open main menu

Changes

3 bytes added ,  00:24, 28 September 2020
Fix ST7 frequencies
*[https://web.archive.org/web/20200914132013/https://www.st.com/resource/en/programming_manual/cd00004616-st7-family-flash-programming-reference-manual-stmicroelectronics.pdf ST7 Family Flash Programming Reference Manual]
*[https://web.archive.org/web/20200914132431/https://www.st.com/resource/en/programming_manual/cd00004617-st7-family-icc-protocol-reference-manual-stmicroelectronics.pdf ST7 Family ICC Protocol Reference Manual]
*With a buffered 16MHz clock provided by Y3/U12, possible CPU speeds are 16MHz8MHz(/1), 8MHz4MHz(/2), 4MHz2MHz(/4), 2MHz1MHz(/8) depending on MCC configuration.
*Instruction timings have yet to be found. The datasheet only says '2-12 cycles per instruction', and a note from Raisonance support says that NOP does indeed take 2 cycles. These will be needed before we can bring up a bit-banged software debug UART as well as the bitstream for the CC1050, and may need to be reverse engineered via GPIO+oscilloscope.