Open main menu

Changes

130 bytes removed ,  00:38, 4 October 2020
m
Add CC1050 errata link
*[https://web.archive.org/web/20200914132431/https://www.st.com/resource/en/programming_manual/cd00004617-st7-family-icc-protocol-reference-manual-stmicroelectronics.pdf ST7 Family ICC Protocol Reference Manual]
*With a buffered 16MHz clock provided by Y3/U12, possible CPU speeds are 8MHz(/1), 4MHz(/2), 2MHz(/4), 1MHz(/8) depending on MCC configuration.
*Instruction timings have yet to be found. The datasheet only says are in the '2-12 cycles per instructionST7 Family Programming Manual', and a note from Raisonance support says that NOP does indeed take 2 cycles. These will be needed before we can bring up a bit-banged software debug UART.
''U4 - (Marked Z252)''
'''U21''' - [http://web.archive.org/web/20190202204556/https://www.ti.com/lit/ds/symlink/cc1050.pdf CC1050] (back) - Low Power Transmitter - 300MHz-1000MHz, variable power, FSK
 
* [https://www.ti.com/lit/er/swrz006a/swrz006a.pdf Errata]
'''U22''' - [http://web.archive.org/web/20200223104004/http://www.ti.com/lit/ds/symlink/tps791.pdf TPS79133DBUR] - 3.3V LDO - for U21
GPS xRESET - connected to 3.3v
== CC1050 Subsystem ==
{| class="wikitable"
!CC1050