199
edits
Changes
Jump to navigation
Jump to search
pressure output
Documenting a particular fork in this where the focus is integration via serial communications with [[Vaisala RS41 Radiosonde Weather Balloon Sensor Payload]] for details on the overall project see the main page [[Whirlybird]].
Expanding ESP32-S3 capabilities with RS41 Radiosonde integration utilizing UART communications. One proof of concept <code>TEST</code> prototype has been constructed using point to soldered connections. The current <code>BETA</code> is being constructed using a modified 10 conductor 1mm spaced flat ribbon cable and 2x5 2mm IDC connector. This makes for a "plug-able" adapter between the sonde and main PCB. The position and connections utilized are an interim test of developing a custom M.2 Key E form factor adapter.
=== Connector Pin Out ===
This is the mapping to a IDC flat ribbon cable with the red stripe indicating Pin 1.
# GROUND
# SWDIO
# RX
# GROUND
Sample output via serial of sensor reading with the additional RS41-SG'''P''' barometric pressure sensor module.
<pre>
# (S)ensors
RH: 41.65 RHtu: 31.19 Trh: 31.24 T: 26.24 Tref: 33.38
Tmcu: 31.44 C: 47.58 Rt: 1138.87 Rts: 1097.28 Tp: 0.0624 Cp: 0.3628
Pressure: 1000.49 PressureT(NTC): 31.95
</pre>
