===Soldering Irons===
====KSGER T12 STM32 v3.1s====
A cheap basic soldering station that uses T12 tips. Has stand-by function using a tilt sensor in the handle to extend the life of your T12 heating element for longer lifespan of the heating element.<br>
Anodized aluminum case, aluminum front panel and control knob. Features a STM32 MCU, [https://github.com/dreamcat4/t12-t245-controllers-docs/tree/master/controllers/stm32-t12-oled firmware upgradable]. Great price - performance ratio.<br>
While in boost mode the T12 tip should be able to output 75 W and tested it was possible to solder 18 AWG copper braided wire.<br>
'''Known quirks''' are that the case is not grounded and in case of a short circuit the case becomes hot (live). User should ground the case out of the box.<br>
[[File:KSGER T12 Soldering station.png|none|thumb|KSGER T12 Soldering station]]
====AiXun Soldering Station with JBC Soldering Tips====
A basic soldering station for general purpose soldering tasks. Unfortunately there are no wave-soldering tips available for this type of iron.
[[File:Weller.JPG|none|thumb|Weller PU 81 Soldering Station]]
====KSGER T12 STM32 v3.1s====
A cheap basic soldering station that uses T12 tips. Has stand-by function using a tilt sensor in the handle to extend the life of your T12 heating element for longer lifespan of the heating element.<br>
Anodized aluminum case, aluminum front panel and control knob. Features a STM32 MCU, [https://github.com/dreamcat4/t12-t245-controllers-docs/tree/master/controllers/stm32-t12-oled firmware upgradable]. Great price - performance ratio.<br>
While in boost mode the T12 tip should be able to output 75 W and tested it was possible to solder 18 AWG copper braided wire.<br>
'''Known quirks''' are that the case is not grounded and in case of a short circuit the case becomes hot (live). User should ground the case out of the box.<br>
[[File:KSGER T12 Soldering station.png|none|thumb|KSGER T12 Soldering station]]
===Desoldering Stations (THT)===