Difference between revisions of "File:Roti rotimatic mixing gears motors pumps tubes load cell.jpg"

From RECESSIM, A Reverse Engineering Community
Jump to navigation Jump to search
(Removal of upper mixer assembly with attached DC motor and two pumps. Motor with lower limit switch and ir sensor on left. Center is a load cell with inscription "10" connected to series of gears driven by horizontally mounted motor. Two tubes from pump connect with spring clips and load cell PCB.)
 
(No difference)

Latest revision as of 06:53, 7 September 2024

Summary

Removal of upper mixer assembly with attached DC motor and two pumps. Motor with lower limit switch and ir sensor on left. Center is a load cell with inscription "10" connected to series of gears driven by horizontally mounted motor. Two tubes from pump connect with spring clips and load cell PCB.

Licensing

Template:Self

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current06:53, 7 September 2024Thumbnail for version as of 06:53, 7 September 20244,000 × 3,008 (6.64 MB)-.-6eau (talk | contribs)Removal of upper mixer assembly with attached DC motor and two pumps. Motor with lower limit switch and ir sensor on left. Center is a load cell with inscription "10" connected to series of gears driven by horizontally mounted motor. Two tubes from pump connect with spring clips and load cell PCB.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://wiki.recessim.com/w/index.php?title=File:Roti_rotimatic_mixing_gears_motors_pumps_tubes_load_cell.jpg&oldid=2559"