Masimo LNCS Neo SpO2 Sensor: Difference between revisions

From RECESSIM, A Reverse Engineering Community
Jump to navigation Jump to search
Created page with "Masimo SpO2 Sensor, Pulse Oximetry, medical device. These are used as "single use" and can be worn for several days after initially being attached to a finger with elastic adh..."
 
Categorisation per 2026-09 category review
 
(2 intermediate revisions by 2 users not shown)
Line 1: Line 1:
Masimo SpO2 Sensor, Pulse Oximetry, medical device. These are used as "single use" and can be worn for several days after initially being attached to a finger with elastic adhesive band. There is a 18 inch cable terminating at a 9 pin connector.  
Masimo LNCS Neo SpO2 sensor, the single-patient-use disposable version. Pulse oximetry, medical device. These are used as "single use" and can be worn for several days after initially being attached to a finger with elastic adhesive band. There is a 18 inch cable terminating at a 9 pin connector.  


https://professional.masimo.com/products/sensors/lncs/single-use/
https://professional.masimo.com/products/sensors/lncs/single-use/
Line 8: Line 8:
Masimo SpO2 Sensor Connector.jpg
Masimo SpO2 Sensor Connector.jpg
</gallery>
</gallery>
[[Category:Medical devices]]
{{Stub}}

Latest revision as of 14:42, 29 September 2026

Masimo LNCS Neo SpO2 sensor, the single-patient-use disposable version. Pulse oximetry, medical device. These are used as "single use" and can be worn for several days after initially being attached to a finger with elastic adhesive band. There is a 18 inch cable terminating at a 9 pin connector.

https://professional.masimo.com/products/sensors/lncs/single-use/