Masimo LNCS Neo SpO2 Sensor: Difference between revisions

From RECESSIM, A Reverse Engineering Community
Jump to navigation Jump to search
Categorisation per 2026-09 category review
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
Masimo SpO2 Sensor, Pulse Oximetry, medical device. These are used as "single use" and can be worn for several days after initially being attached to a finger with elastic adhesive band. There is a 18 inch cable terminating at a 9 pin connector.  
Masimo LNCS Neo SpO2 sensor, the single-patient-use disposable version. Pulse oximetry, medical device. These are used as "single use" and can be worn for several days after initially being attached to a finger with elastic adhesive band. There is a 18 inch cable terminating at a 9 pin connector.  


https://professional.masimo.com/products/sensors/lncs/single-use/
https://professional.masimo.com/products/sensors/lncs/single-use/
Line 8: Line 8:
Masimo SpO2 Sensor Connector.jpg
Masimo SpO2 Sensor Connector.jpg
</gallery>
</gallery>
[[Category:Medical devices]]
{{Stub}}

Latest revision as of 14:42, 29 September 2026

Masimo LNCS Neo SpO2 sensor, the single-patient-use disposable version. Pulse oximetry, medical device. These are used as "single use" and can be worn for several days after initially being attached to a finger with elastic adhesive band. There is a 18 inch cable terminating at a 9 pin connector.

https://professional.masimo.com/products/sensors/lncs/single-use/