Blink SyncModule 2: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
[[File:Photo3.jpg|900px|thumb]] | |||
== What is it? == | == What is it? == | ||
According to the manufacturer: | According to the manufacturer: | ||
| Line 10: | Line 12: | ||
* Record and store motion clips when you insert a USB flash drive (up to 256 GB). | * Record and store motion clips when you insert a USB flash drive (up to 256 GB). | ||
== Teardown == | == Main components == | ||
=== Microcontroller === | |||
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">[https://www.nxp.com/part/MCIMX6Z0DVM09AB#/]</ref> | |||
* ARM Cortex-A7 running Linux | |||
* 900MHz | |||
* SRAM: 128kB | |||
* SPI/UART/I2C | |||
* 96KB bootrom, 128KB internal RAM | |||
* Has Arm TrustZone | |||
=== Wifi/Bluetooth Module === | |||
NXP 88W8987-NYE2<ref name="NXP 88W8987-NYE2">[https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987]</ref> | |||
* 2.4/5Ghz Wifi | |||
* Bluetooth 5.2 (BLE also) | |||
=== Serial flash === | |||
Winbond 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">[https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV]</ref> | |||
* 256M-bit | |||
* Dual/Quad SPI XIP (133MHz SPI) | |||
=== RAM === | |||
ISSI IS43TR16640BL<ref name="ISSI IS43TR16640BL">[https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf]</ref> | |||
* 1GB SDRAM | |||
* 16bit DDR3 | |||
== Teardown pictures == | |||
<gallery> | <gallery> | ||
Blink_syncmodule2_photo1.jpg| | Blink_syncmodule2_photo1.jpg|Front face of the BSM2 | ||
Photo2.jpg|Back face of the BSM2 | |||
Photo3.jpg|Top view | |||
Photo4.jpg|To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off. | |||
Photo5.jpg|PCB view (top) | |||
Photo6.jpg|PCB view (top) closeup | |||
Photo8.jpg|PCB view (bottom) | |||
Photo9.jpg|Serial Flash closeup | |||
Photo10.jpg|MCU closeup | |||
Photo11.jpg|SRAM closeup | |||
Photo12.jpg|Wifi/BT module closeup | |||
</gallery> | </gallery> | ||
<references /> | |||
Revision as of 00:23, 2 September 2023
What is it?
According to the manufacturer: "The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The Sync Module 2 requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten Blink devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."[1]
What can it do?
- Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
- Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
- Support local video storage for up to 10 Blink cameras.
- Record and store motion clips when you insert a USB flash drive (up to 256 GB).
Main components
Microcontroller
NXP MCIMX6Z0DVM09AB[2]
- ARM Cortex-A7 running Linux
- 900MHz
- SRAM: 128kB
- SPI/UART/I2C
- 96KB bootrom, 128KB internal RAM
- Has Arm TrustZone
Wifi/Bluetooth Module
NXP 88W8987-NYE2[3]
- 2.4/5Ghz Wifi
- Bluetooth 5.2 (BLE also)
Serial flash
Winbond 25Q256JVEQ[4]
- 256M-bit
- Dual/Quad SPI XIP (133MHz SPI)
RAM
ISSI IS43TR16640BL[5]
- 1GB SDRAM
- 16bit DDR3
Teardown pictures
-
Front face of the BSM2 -
Back face of the BSM2 -
Top view -
To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off. -
PCB view (top) -
PCB view (top) closeup -
PCB view (bottom) -
Serial Flash closeup -
MCU closeup -
SRAM closeup -
Wifi/BT module closeup
