Difference between revisions of "Blink SyncModule 2"

From RECESSIM, A Reverse Engineering Community
Jump to navigation Jump to search
VisualWikitext
(I updated this entry to have more accurate information about the previously unknown transceiver IC.)
(→‎Main components: Added board revision A0 - blink)
Line 14: Line 14:
 
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).
 
*Record and store motion clips when you insert a USB flash drive (up to 256 GB).
  
−
==Main components==
+
==Main components ==
−
===Microcontroller===
+
The Blink Sync Module 2 has 2 documented board types, they can easily be identified by the microprocessor being mounted on the bottom or top of the PCB, if the chip is on the bottom board rev = A0 Blink board.
 +
 
 +
=== Amazon Board ===
 +
 
 +
====Microcontroller====
 
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">https://www.nxp.com/part/MCIMX6Z0DVM09AB#/</ref>
 
NXP MCIMX6Z0DVM09AB<ref name="NXP MCIMX6Z0DVM09AB">https://www.nxp.com/part/MCIMX6Z0DVM09AB#/</ref>
  
Line 25: Line 29:
 
*Has Arm TrustZone
 
*Has Arm TrustZone
  
−
===Wifi/Bluetooth Module===
+
====Wifi/Bluetooth Module====
 
[[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987</ref>
 
[[NXP]] 88W8987-NYE2<ref name="NXP 88W8987-NYE2">https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987</ref>
  
Line 31: Line 35:
 
*Bluetooth 5.2 (BLE also)
 
*Bluetooth 5.2 (BLE also)
  
−
===Serial flash===
+
====Serial flash====
 
[[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV</ref>
 
[[Winbond]] 25Q256JVEQ<ref name="Winbond 25Q256JVEQ">https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV</ref>
  
Line 37: Line 41:
 
*Dual/Quad SPI XIP (133MHz SPI)
 
*Dual/Quad SPI XIP (133MHz SPI)
  
−
===RAM===
+
====RAM====
 
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf</ref>
 
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL">https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf</ref>
  
Line 43: Line 47:
 
*16bit DDR3
 
*16bit DDR3
  
−
===Sub-GHz "EZRadio" Transceiver===
+
====Sub-GHz "EZRadio" Transceiver====
 +
Markings: 455A CQRX 220
 +
 
 +
Silicon Labs Si4455<ref name=":0">https://www.silabs.com/documents/public/data-sheets/Si4455.pdf</ref>
 +
 
 +
*Frequency of 283–960 MHz
 +
*–116 dBm Sensitivity
 +
*Modulation:
 +
**(G)FSK
 +
**OOK
 +
*+13 dBm Max output power
 +
*50 nA Standby Current
 +
*500 kbps Max Data Rate
 +
*1.8 to 3.6 VDC <br />
 +
 
 +
=== Rev A0 Blink Board ===
 +
 
 +
====Microcontroller====
 +
[[Atheros]] AR9331 rev 1 (MIPS 24Kc @ 400MHz)
 +
 
 +
====Wifi Module====
 +
Onboard [[Atheros]] AR9331
 +
 
 +
====Serial flash====
 +
[[Winbond]] 25Q64
 +
 
 +
====RAM====
 +
[[ISSI]] IS43TR16640BL<ref name="ISSI IS43TR16640BL" />
 +
 
 +
*64mb DDR2 16 bit
 +
 
 +
====Sub-GHz "EZRadio" Transceiver====
 
Markings: 455A CQRX 220
 
Markings: 455A CQRX 220
  
−
Silicon Labs Si4455<ref>https://www.silabs.com/documents/public/data-sheets/Si4455.pdf</ref>
+
Silicon Labs Si4455<ref name=":0" />
 +
 
 +
*Frequency of 283–960 MHz
 +
*–116 dBm Sensitivity
 +
*Modulation:
 +
**(G)FSK
 +
**OOK
 +
*+13 dBm Max output power
 +
*50 nA Standby Current
 +
*500 kbps Max Data Rate
 +
*1.8 to 3.6 VDC
  
−
* Frequency of 283–960 MHz
+
==Teardown pictures ==
−
* –116 dBm Sensitivity
 
−
* Modulation:
 
−
** (G)FSK
 
−
** OOK
 
−
* +13 dBm Max output power
 
−
* 50 nA Standby Current
 
−
* 500 kbps Max Data Rate
 
−
* 1.8 to 3.6 VDC
 
  
−
==Teardown pictures==
+
==== Amazon Board ====
 
<gallery>
 
<gallery>
 
File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
 
File:Blink syncmodule2 photo1.jpg|Front face of the BSM2
Line 74: Line 111:
 
File:Bottom layer zoom.jpg
 
File:Bottom layer zoom.jpg
 
File:Sync module 2 top layer zoom.jpg
 
File:Sync module 2 top layer zoom.jpg
 +
</gallery><br />
 +
 +
==== Rev A0 - Blink Board ====
 +
<gallery>
 +
File:Blink-sync-module-2-shell.jpg|Outer shell
 +
File:Blink Sync Module 2 - rev a0 - Pins.png|Labelled Pins, TM1 = RX, TM2 = TX, TM3 = GND
 +
File:Blink sync module 2 PCB (top) - rev a0.jpg|Top face
 +
File:Blink Sync Module 2 PCB (bottom) - Rev A0.jpg|Bottom face
 
</gallery>
 
</gallery>
  
Line 80: Line 125:
  
 
Baud rate is 115200.
 
Baud rate is 115200.
−
[[File:Txpin.png|none|frame]]
 
  
 +
==== Amazon Board ====
 +
[[File:Txpin.png|none|frame]]<br />
 +
 +
==== Rev A0 - Blink Board ====
 +
TM2 for reading UART
 +
<br />
 +
[[File:Blink Sync Module 2 - rev a0 - Pins.png|thumb|TM2 = TX]]
 +
<br />
 
==References==
 
==References==
 
<references />
 
<references />

Revision as of 00:06, 11 February 2026

Photo3.jpg

What is it?

Home appliance to control other Amazon Blink devices.

According to the manufacturer: "The Sync Module is a hub that plugs into an electrical outlet to relay commands and network details to devices in the system it manages. The Sync Module 2 requires a power outlet and is connected to your always-on Wi-Fi network to handle activity for up to ten Blink devices. This extends camera battery life, saves clips without a subscription, improves convenience for scheduling, and arms a group of devices at once."[1]

What can it do?

  • Control Blink devices (cameras, doorbells, etc) from the Blink mobile app
  • Connect up to 10 of any Blink Outdoor 4, Wired Floodlight, Outdoor and Indoor (all models), XT2, XT, Video Doorbell*, and Mini* cameras.
  • Support local video storage for up to 10 Blink cameras.
  • Record and store motion clips when you insert a USB flash drive (up to 256 GB).

Main components

The Blink Sync Module 2 has 2 documented board types, they can easily be identified by the microprocessor being mounted on the bottom or top of the PCB, if the chip is on the bottom board rev = A0 Blink board.

Amazon Board

Microcontroller

NXP MCIMX6Z0DVM09AB[2]

  • ARM Cortex-A7 running Linux
  • 900MHz
  • SRAM: 128kB
  • SPI/UART/I2C
  • 96KB bootrom, 128KB internal RAM
  • Has Arm TrustZone

Wifi/Bluetooth Module

NXP 88W8987-NYE2[3]

  • 2.4/5Ghz Wifi
  • Bluetooth 5.2 (BLE also)

Serial flash

Winbond 25Q256JVEQ[4]

  • 256M-bit
  • Dual/Quad SPI XIP (133MHz SPI)

RAM

ISSI IS43TR16640BL[5]

  • 1GB SDRAM
  • 16bit DDR3

Sub-GHz "EZRadio" Transceiver

Markings: 455A CQRX 220

Silicon Labs Si4455[6]

  • Frequency of 283–960 MHz
  • –116 dBm Sensitivity
  • Modulation:
    • (G)FSK
    • OOK
  • +13 dBm Max output power
  • 50 nA Standby Current
  • 500 kbps Max Data Rate
  • 1.8 to 3.6 VDC

Rev A0 Blink Board

Microcontroller

Atheros AR9331 rev 1 (MIPS 24Kc @ 400MHz)

Wifi Module

Onboard Atheros AR9331

Serial flash

Winbond 25Q64

RAM

ISSI IS43TR16640BL[5]

  • 64mb DDR2 16 bit

Sub-GHz "EZRadio" Transceiver

Markings: 455A CQRX 220

Silicon Labs Si4455[6]

  • Frequency of 283–960 MHz
  • –116 dBm Sensitivity
  • Modulation:
    • (G)FSK
    • OOK
  • +13 dBm Max output power
  • 50 nA Standby Current
  • 500 kbps Max Data Rate
  • 1.8 to 3.6 VDC

Teardown pictures

Amazon Board

  • Front face of the BSM2

  • Back face of the BSM2

  • Top view

  • To take off the top part just use a spudger, guitar pic, etc. No glue or screws to take the top cover off.

  • PCB view (top)

  • PCB view (top) closeup

  • PCB view (bottom)

  • Serial Flash closeup

  • MCU closeup

  • SRAM closeup

  • Si4455

  • Wifi/BT module closeup

  • Bottom layer zoom.jpg
  • Sync module 2 top layer zoom.jpg


Rev A0 - Blink Board

  • Outer shell

  • Labelled Pins, TM1 = RX, TM2 = TX, TM3 = GND

  • Top face

  • Bottom face

Serial Communications

It is possible to read the boot of the device by connecting to the indicated pin.

Baud rate is 115200.

Amazon Board

Txpin.png


Rev A0 - Blink Board

TM2 for reading UART

TM2 = TX


References

  1. ↑ [ https://support.blinkforhome.com/en_US/faq-sm/sync-module-2-faqs]
  2. ↑ https://www.nxp.com/part/MCIMX6Z0DVM09AB#/
  3. ↑ https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987
  4. ↑ https://www.winbond.com/hq/product/code-storage-flash-memory/serial-nor-flash/?__locale=en&partNo=W25Q256JV
  5. ↑ 5.0 5.1 https://www.issi.com/WW/pdf/43-46TR16640B-81280BL.pdf
  6. ↑ 6.0 6.1 https://www.silabs.com/documents/public/data-sheets/Si4455.pdf
Retrieved from "https://wiki.recessim.com/w/index.php?title=Blink_SyncModule_2&oldid=3276"