77
edits
Changes
m
→Viewing Raw Thermal Data from the Web API: formatting fix
we are mainly interessted in Raw thermal data.
======'''Source''' (Stream Type)======
*<code>Major</code> - Main video stream (channel 0)
*<code>YUV</code> - YUV raw video stream
======'''Type''' (Data Format)======
*<code>H264</code> - H.264 video encoding
*<code>FRAME</code> - Frame-based format
======'''Mode''' (Transport Protocol)======
*<code>TCP</code> - TCP streaming (default)
*<code>MUL</code> - Multicast streaming
======'''Quality Parameters'''======
*<code>Quality=[1-100]</code> - Video quality level
*<code>Interval=[ms]</code> - Frame interval in milliseconds
======'''Network Parameters'''======
*<code>IPAddr=[ip]</code> - Client IP address for UDP/multicast
*<code>Heart-beat=[Yes/No]</code> - Enable/disable heartbeat
======'''Snapshot Parameters'''======
*[[File:Dali D8X3N Raw Thermal viewer.png|thumb|Raw Data Viewer in python]]<code>Snap=[Yes/No]</code> - Enable snapshot mode
repeat that procedure for the dali.cfg
===== (optional) patching app.sh to prevent it from rebooting =====
edit the app.sh in /app and remove all "reboot" occasions to prevent the camera from rebooting if onvifserver, httpd or daliServer arent running for debugging purposes.
=== Secret Menu Overview ===
The secret menus Main and System can be openend with the password '''+-MC+-'''
</syntaxhighlight>
=== Automatic Dead Pixels and Flatmap Correction ===
<br />
===== Dead pixels: =====
In the secret menu "System", navigate to Debug - DeadPixelModel and set the AutoBP (sensitivity for auto bad pixel finding) to 50 or so. Then press C Button
<br />
===== Flatfield: =====
In the Debug menu navigate to R2 and press +