Roland DIF-AT: Difference between revisions
added info to device over view pin header listings |
|||
| Line 46: | Line 46: | ||
It has 2 buttons on the PCB: 1 - RESET, reset circuit and IC 2 - Launch monitor diagnostic mode. A 50 pin header provides easy access to most address lines and relevant (to operation) CPU/RAM/Flash lines. This will be convenient to run a logic capture during boot and operation later. | It has 2 buttons on the PCB: 1 - RESET, reset circuit and IC 2 - Launch monitor diagnostic mode. A 50 pin header provides easy access to most address lines and relevant (to operation) CPU/RAM/Flash lines. This will be convenient to run a logic capture during boot and operation later. | ||
I beeped out the 50 pin connector - | I beeped out the 50 pin connector - Many pins have multiple connections. Happily; the vias were not tented - this was a long endeavour even with | ||
continuity through the vias : ) <gallery> | |||
File:DIFat 50 pin header1 .png|alt=dif at pin header pins 1 - 16|header pins 1 - 16 | File:DIFat 50 pin header1 .png|alt=dif at pin header pins 1 - 16|header pins 1 - 16 | ||
File:DIFat 50 pin header2.png|alt=header pins 16 - 24|header pins 16 - 24 | File:DIFat 50 pin header2.png|alt=header pins 16 - 24|header pins 16 - 24 | ||