Telematics Wireless FP300RA: Difference between revisions

From RECESSIM, A Reverse Engineering Community
Jump to navigation Jump to search
← Older editNewer edit →
VisualWikitext
Added thumbnail
Added gallery images
Line 3: Line 3:


[https://fccid.io/NTAFP300RA/User-Manual/Users-Manual-Revised-573746.pdf User Manual]
[https://fccid.io/NTAFP300RA/User-Manual/Users-Manual-Revised-573746.pdf User Manual]
----<gallery mode="packed" heights="250">
File:TelematicsWireless FP300RA PCBTop withCan.JPG|Overview of PCB with RF section covered with metal can
File:TelematicsWireless FP300RA PCBTop.jpg|High-Res PCB Top, RF can removed
File:TelematicsWireless FP300RA PCBBottom.jpg|High-Res PCB Bottom
File:TelematicsWireless FP300RA ConnSerial.JPG|Serial port connections
File:TelematicsWireless FP300RA ConnRF.JPG|RF connections
File:TelematicsWireless FP300RA CaseTop.JPG|Case Top
File:TelematicsWireless FP300RA CaseBottom.JPG|Case Bottom
File:TelematicsWireless FP300RA EndPlates.JPG|Cover plates and RF gaskets used on DB9 ports
</gallery>

Revision as of 18:54, 19 December 2021

The FP-300RA reader is a roadside component made by Telematics Wireless for use in electronic Automatic Vehicle Identification systems.

User Manual

  • Overview of PCB with RF section covered with metal can
    Overview of PCB with RF section covered with metal can
  • High-Res PCB Top, RF can removed
    High-Res PCB Top, RF can removed
  • High-Res PCB Bottom
    High-Res PCB Bottom
  • Serial port connections
    Serial port connections
  • RF connections
    RF connections
  • Case Top
    Case Top
  • Case Bottom
    Case Bottom
  • Cover plates and RF gaskets used on DB9 ports
    Cover plates and RF gaskets used on DB9 ports
Retrieved from "https://wiki.recessim.com/w/index.php?title=Telematics_Wireless_FP300RA&oldid=1594"