User contributions
Jump to navigation
Jump to search
- 07:13, 7 September 2024 diff hist +121 N File:Roti rotimatic oil damage under load cell PCB .jpg Small puddle of oil corroding metal under PCB connected to load cell. current
- 07:11, 7 September 2024 diff hist +105 N File:Roti rotimatic complete load cell mixer motor.jpg Load cell and sensor PCB with geared motor assembly. current
- 07:09, 7 September 2024 diff hist +104 N File:Roti rotimatic load cell mixer motor.jpg Load cell and sensor PCB with geared motor assembly. current
- 07:06, 7 September 2024 diff hist +134 N File:Roti rotimatic flour water oil dispenser bottom.jpg Bottom view of flour, water and oil dispensers with pumps motor tubes and sensors. current
- 07:04, 7 September 2024 diff hist +262 N File:Roti rotimatic flour dispenser motor PCB boards encoder.jpg Bottom view of flour dispenser mechanism located on top of the machine. PCB board for distribution of multiple connectors and separate encoder board for motor. ZEM0032-01 INTERFACE, DOCK ZEM####-01 ENCODER, PD current
- 06:59, 7 September 2024 diff hist +129 N File:Roti rotimatic two peristaltic pumps water oil.jpg Blue'ish and red'ish peristaltic pumps for water and oil driven by DC motors. current
- 06:57, 7 September 2024 diff hist +223 N File:Roti rotimatic high speed mixer motor gears load cell.jpg Closer view of high speed motor with horizontal metal screw drive to plastic gears and cooling fan at end of shaft. Load cell in lower left and red/blue pumps upper right. current
- 06:53, 7 September 2024 diff hist +350 N File:Roti rotimatic mixing gears motors pumps tubes load cell.jpg Removal of upper mixer assembly with attached DC motor and two pumps. Motor with lower limit switch and ir sensor on left. Center is a load cell with inscription "10" connected to series of gears driven by horizontally mounted motor. Two tubes from pump connect with spring clips and load cell PCB. current
- 06:48, 7 September 2024 diff hist +218 N File:Roti rotimatic RB-30GM 12 volt DC geared motor ir disc.jpg RB-30GM 12 volt DC motor with gear box connected to shaft with disc/wheel for ir position sensor. Installed at front-right side of machine and read by ZEM0031-04 PCB. current
- 06:43, 7 September 2024 diff hist +206 N File:Roti rotimatic connectors ir limit switch ZEM0031-04 back.jpg Back of infrared sensor with connectors to main board and lower limit switch. R19 unpopulated, R18 populated with 0 ohm resistor jumper and 3 discrete SMD capacitors. ZEM0031-04 INTERFACE, VT current
- 06:40, 7 September 2024 diff hist +234 N File:Roti rotimatic infrared position sensor IC1 ZEM0031-04.jpg Infrared (IR) position sensor "IC1" that optically reads marked disc connected to motor. Positioned above lower limit switch on front-right side of machine. ZEM0031-04 INTERFACE, VT current
- 06:31, 7 September 2024 diff hist +200 N File:Roti rotimatic ZEM0024-01 PCB .jpg Back of lower limit switch PCB installed in front-right side of machine. 3 pin connector daisy chained to another sensor board. ZEM0024 - 01 LS, VT current
- 06:29, 7 September 2024 diff hist +133 N File:Roti rotimatic ZEM0024-01 limit switch PCB.jpg Lower limit switch installed on front-right side of machine. ZEM0024 - 01 LS, VT current
- 06:26, 7 September 2024 diff hist +168 N File:Roti rotimatic capacitive touch IC.jpg Close up of IC for capacitive touch input. Curved traces and bank of parallel capacitors. ZEM0038-02 PCB, CAP TOUCH current
- 06:24, 7 September 2024 diff hist +159 N File:Roti rotimatic capacitive touch PCB back.jpg Reverse of capacitive touch board with 16 pin QFN controller chip and flex cable. ZEM0038-02 CAP TOUCH PCB current
- 06:13, 7 September 2024 diff hist +161 N File:Roti rotimatic capacitive touch PCB front.jpg ZEM0038-02 CAP TOUCH PCB ON | OFF (Top Left) START | PAUSE (Right) RECIPE - THICKNESS - ROAST - OIL (BOTTOM) current
- 06:10, 7 September 2024 diff hist +217 N File:Roti rotimatic LCD.jpg LCD with flat flex used in main panel. The full display area is actually cropped with fully installed and portions of the edge of screen are not visible to the user. current
- 06:07, 7 September 2024 diff hist +201 N File:Roti rotimatic Soway P112-AL1-035 sensor magnetic reed switch screwed.jpg Magnetic non-contact reed switch attached with two torx screws. https://www.sowaytech.com/sdp/302911/4/pd-1125040/20969316-2310150/SP111-AL1-035_Soway_Magnetic_Sensor_Switch_Non-con.html current
- 06:05, 7 September 2024 diff hist +194 N File:Roti rotimatic Soway P112-AL1-035 sensor magnetic reed switch.jpg Magnetic non-contact reed switch attached with adhesive. https://www.sowaytech.com/sdp/302911/4/pd-1125040/20969316-2310150/SP111-AL1-035_Soway_Magnetic_Sensor_Switch_Non-con.html current
- 06:00, 7 September 2024 diff hist +179 N File:Roti rotimatic front panel back.jpg Main panel LCD and capacitive touch button assembly. Attached with 4 torx screws. One of two door closed sensors shown, PS4 connection on left goes to second sensor. current
- 05:53, 7 September 2024 diff hist +706 N File:Roti rotimatic top no cover.jpg View of entire machine from the top with cover, front and back panels removed. Note side panel with wireless module flat flex at top left. 2 twisted pairs of red/black wires connecting in lower middle left of main board. Upper pair goes to side panel. Lower pair goes to rear fan (right side of picture). Front panel screen flex connector towards top of left edge of board, next to buttons flat flex just below it. Two mains pairs of AC wires brown/blue independently routed one directly to right... current
- 05:38, 7 September 2024 diff hist +200 N File:Roti rotimatic main board PIC32MX470F512L.jpg PCB: ZEM0021-07 PIC32MX470F512L-I/PT MIPS32® M4K™ PIC® 32MX Microcontroller IC 32-Bit Single-Core 80MHz 512KB (512K x 8) FLASH 100-TQFP (12x12) current
- 05:33, 7 September 2024 diff hist +87 N File:Roti rotimatic bluegiga WF121-A.jpg Wireless board with 802.11 b/g/n bluegiga module and flat flex connector. current
- 05:29, 7 September 2024 diff hist +408 N File:Roti rotimatic under rear cover.jpg Opening rear cover after popping plastic latches and removing T20 screw from bottom. Fan wiring passes to connector on top of main board, one of two. Upper board with 5 wires is external USB connector, presumably for thumb stick to reflash firmware. 2 wire AC mains, brown and blue with ferrites. Not shown reset-able 2 prong plug for connecting to outlet. current
- 05:17, 7 September 2024 diff hist +99 N File:Roti rotimatic complete set.jpg The entire device prior to further exploration. current
- 05:09, 7 September 2024 diff hist +112 N File:Roti rotimatic plastic.jpg Robot shell, only all of the plastic components "assembled". current
- 05:03, 7 September 2024 diff hist +3,276 N Roti making robot rotimatic helorld!
- 04:26, 7 September 2024 diff hist +70 N File:Roti rotomatic Trouble powering on 0x6.jpg Error message displayed when powering on September 2024. current
- 23:20, 5 September 2024 diff hist +1,216 N Rechargeable Disposable Vape Teardown Vape Teardown summary and images current
- 22:35, 5 September 2024 diff hist 0 N File:Vape CRU Stick.jpeg current
- 22:34, 5 September 2024 diff hist 0 N File:Vape Cracked Open.jpeg current
- 22:31, 5 September 2024 diff hist 0 N File:Vape Mic Controller Back Close.jpeg current
- 22:30, 5 September 2024 diff hist 0 N File:Vape Mic Controller.jpeg current
- 22:30, 5 September 2024 diff hist 0 N File:Vape Naked Battery Charging.jpeg current
- 22:30, 5 September 2024 diff hist 0 N File:Vape Torndown.jpeg current
- 22:29, 5 September 2024 diff hist 0 N File:Vape USB-C Board Back.jpeg current
- 22:28, 5 September 2024 diff hist 0 N File:Vape USB-C Board.jpeg current
- 00:39, 26 June 2024 diff hist +9 N User:-.-6eau init() Tag: Visual edit: Switched
