File:Roti rotimatic connectors ir limit switch ZEM0031-04 back.jpg

From RECESSIM, A Reverse Engineering Community
Revision as of 06:43, 7 September 2024 by -.-6eau (talk | contribs) (Back of infrared sensor with connectors to main board and lower limit switch. R19 unpopulated, R18 populated with 0 ohm resistor jumper and 3 discrete SMD capacitors. ZEM0031-04 INTERFACE, VT)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file ‎(4,096 × 3,072 pixels, file size: 5.26 MB, MIME type: image/jpeg)

Summary

Back of infrared sensor with connectors to main board and lower limit switch. R19 unpopulated, R18 populated with 0 ohm resistor jumper and 3 discrete SMD capacitors.

ZEM0031-04 INTERFACE, VT

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current06:43, 7 September 2024Thumbnail for version as of 06:43, 7 September 20244,096 × 3,072 (5.26 MB)-.-6eau (talk | contribs)Back of infrared sensor with connectors to main board and lower limit switch. R19 unpopulated, R18 populated with 0 ohm resistor jumper and 3 discrete SMD capacitors. ZEM0031-04 INTERFACE, VT

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://wiki.recessim.com/w/index.php?title=File:Roti_rotimatic_connectors_ir_limit_switch_ZEM0031-04_back.jpg&oldid=2557"