File:Kenwood TH-D74 Control Board Boot Pins.jpeg

From RECESSIM, A Reverse Engineering Community
Revision as of 03:36, 14 July 2020 by Hash (talk | contribs) (Test point locations for Boot[] pins which set the boot-up mode of the OMAP L138 processor, in this case to boot from NOR Flash.)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Original file ‎(2,303 × 1,729 pixels, file size: 1.01 MB, MIME type: image/jpeg)

Summary

Test point locations for Boot[] pins which set the boot-up mode of the OMAP L138 processor, in this case to boot from NOR Flash.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current03:36, 14 July 2020Thumbnail for version as of 03:36, 14 July 20202,303 × 1,729 (1.01 MB)Hash (talk | contribs)Test point locations for Boot[] pins which set the boot-up mode of the OMAP L138 processor, in this case to boot from NOR Flash.

You cannot overwrite this file.

The following page uses this file:

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Retrieved from "https://wiki.recessim.com/w/index.php?title=File:Kenwood_TH-D74_Control_Board_Boot_Pins.jpeg&oldid=719"