Changes

A little issue I found in my tinkering exploits, Neato would suddenly power off when issuing commands. This seems to be because I was issuing a large amount of commands within a short period of time. To give you an idea, I was issuing a set of three SetLED commands once every 20ms. Within about 2seconds, Neato would power off. To fix the issue, unplug your USB, power up Neato and reconnect the USB.

[[File:Neato XV-11 LCD panel front labels.png|thumb|Neato XV-11 LCD panel front ]]

[[File:Neato XV-11 LCD panel back labels.png|thumb|Neato XV-11 LCD panel back ]]

IMPORTANT DISCLAIMER: I did my best to determine all the dimensions, but there are likely some minor inaccuracies. Looking at the XV-11’s case, the LCD PCB fits snugly in the outline and all the buttons and LED’s have to line up nicely with the plastic to work properly. If for whatever reason you want to use these files to produce a custom LCD peripheral board, just be warned it may not work (but this is probably your best chance at a template for one).