Difference between revisions of "Electronic Tools"
Polymorphic7 (talk | contribs) m (Added some cheap beginners debugging tools) |
Polymorphic7 (talk | contribs) |
||
| Line 25: | Line 25: | ||
[https://www.tincantools.com/product/flyswatter2/ FlySwatter2] - In-circuit JTAG debugger and programmer. | [https://www.tincantools.com/product/flyswatter2/ FlySwatter2] - In-circuit JTAG debugger and programmer. | ||
</div>[https://www.sparkfun.com/products/12942 Bus Pirate] - is a universal bus interface device designed for programming, debugging, and analyzing microcontrollers and other ICs. | </div>[https://www.sparkfun.com/products/12942 Bus Pirate] - is a universal bus interface device designed for programming, debugging, and analyzing microcontrollers and other ICs. | ||
| − | </div>[https://www.crowdsupply.com/securinghw/tigard Tigard] | + | </div>[https://www.crowdsupply.com/securinghw/tigard Tigard] - is a open source FT2232H-based, multi-protocol, multi-voltage tool for hardware hacking. |
</div> | </div> | ||
<div id="tools_row2" class="mainpage_row"> | <div id="tools_row2" class="mainpage_row"> | ||
Revision as of 15:00, 8 October 2023
Multimeters, Function Generators, Oscilloscopes, Logic Analyzers, Spectrum Analyzers, Software Defined Radios and Open Source/Community Designed Tools. If you used it while reverse engineering, list it here!
Contents
Tool Index
Software Defined Radios
RTL-SDR - Very low cost (~$30) receiver operating from about 52MHz to 2200MHz.
SDRPlay RSP1a - Medium cost (~$160) receiver operating from 100 Khz to 2000 MHZ. Device includes a lot of selectable filters (to cancel broadcast FM, WiFi interference, PC interference etc).
HackRF One - Capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. Cost ~$340
Ettus Research USRP B200 - Universal Software Radio Peripheral with continuous frequency coverage from 70 MHz –6 GHz. Wider bandwidth and higher resolution ADC/DAC than the HackRF; cost with enclosure ~$875.
Debugging Tools
JTAGulator - open source hardware tool that assists in identifying OCD connections from test points, vias, or component pads on a target device.
FlySwatter2 - In-circuit JTAG debugger and programmer.
Test Enclosures
Ramsey STE-3000 Shielded Test Enclosure - Faraday cage for isolating RF signals
IC Decapsulating
B&G International Decapsulator Model 250 - Acid etching decapsulation tool from the early 2000's
