Electronic Tools

From RECESSIM, A Reverse Engineering Community
Revision as of 22:31, 24 October 2020 by Hash (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Oscilloscope and various multimeters

Multimeters, Function Generators, Oscilloscopes, Logic Analyzers, Spectrum Analyzers, Software Defined Radio's and Open Source/Community Designed Tools. If you used it while reverse engineering, list it here!

Tool Index[edit | edit source]

Software Defined Radio’s

RTL-SDR - Very low cost (~$30) receiver operating from about 52MHz to 2200MHz.

HackRF One - Capable of transmission or reception of radio signals from 1 MHz to 6 GHz. Open source hardware platform that can be used as a USB peripheral or programmed for stand-alone operation. Cost ~$340

Ettus Research USRP B200 - Universal Software Radio Peripheral with continuous frequency coverage from 70 MHz –6 GHz. Wider bandwidth and higher resolution ADC/DAC than the HackRF; cost with enclosure ~$875.

Debugging Tools

JTAGulator - open source hardware tool that assists in identifying OCD connections from test points, vias, or component pads on a target device.

FlySwatter2 - In-circuit JTAG debugger and programmer.

IC Decapsulating

B&G International Decapsulator Model 250 - Acid etching decapsulation tool from the early 2000's