LMS-6 Radiosonde: Difference between revisions
→Connectors: GPS TX and RX pins confirmed by rsaxvc |
Added section on ST7 programmers and interface |
||
| Line 916: | Line 916: | ||
===Why we're not going to do 9600baud 70CM FSK modulation=== | ===Why we're not going to do 9600baud 70CM FSK modulation=== | ||
For these to be a usable tracker we're going to need ground stations. In the Kansas City metro, there's not many APRS digipeaters on 70cm, and the few there are use 1200 baud AFSK, not 9600 baud FSK. | For these to be a usable tracker we're going to need ground stations. In the Kansas City metro, there's not many APRS digipeaters on 70cm, and the few there are use 1200 baud AFSK, not 9600 baud FSK. | ||
== ST7 Programming == | |||
The ST7 can be programmed using the RLINK-STD programmer. This programmer is available from Digi-Key https://www.digikey.com/en/products/detail/iotize/RLINK-STD/9923059 | |||
The FlashBash ST7 programmer claims to be able to program the ST7 on the LMS-6. This has not been evaluated yet. http://www.spen-soft.co.uk/ | |||
Card edge interface: https://github.com/Reid-n0rc/LMS-6_Interface_Board | |||
==Reference== | ==Reference== | ||