59
edits
Changes
Jump to navigation
Jump to search
|!'''Manufacturer Part Number'''|!'''Manufacturer'''|!'''Digi-Key Part Number'''|!'''Customer Reference'''|!'''Reference Designator'''|!'''Packaging'''|!'''Part Status'''|!'''Quantity'''|!'''Unit Price'''|!'''Extended Price'''|!'''Quantity Available'''|!'''Mfg Std Lead Time'''|!'''Description'''|!'''RoHS Status'''|!'''Lead Free Status'''|!'''REACH Status'''
→Power: Added info on jumpers for different power sources
{| class="wikitable sortable mw-collapsible mw-collapsed"
|+LMS-6 Card Edge Connector Digi-Key BOM
|-
|885012207095
|}
==== Interface Description and Theory of Operation ====
The LMS-6 interface PCB allows the LMS-6 to be powered, connect to USB to UART, and connect to an in circuit programmer through the card edge connector.
{| class="wikitable"
|+Power Jumper Settings
! rowspan="2" |Jumper Ref Des
! colspan="4" |Jumpered Pins
|-
!Battery
!USB 5V
!Banana Jacks Regulated (J1&J3)
!Direct Power (J11&J12)
|-
|J2
|X
|2,3
|1,2
|X
|-
|J6
|1,2
|2,3
|2,3
|2,3
|-
|J10
|X
|2,3
|2,3
|1,2
|}
=====Circuit Power Options=====
The LMS-6 Inteface board offers four power options to power LMS-6.
====== Battery Power ======
The LMS-6 can be powered using three CR123 lithium batteries connected to the LMS-6 onboard battery holders. Batter power is enabled by jumpering Pin 1 and Pin to of J6 together.
====== USB 5V Power ======
The LMS-6 can be powered from the J4 Micro USB B connection. This is enabled by jumpering Pin 2 and Pin 3 of J2; Pin 2 and Pin 3 of J6.
USB power is indicated by D2 Green LED
===== Power USB to UART=====
===== USB to UART In Circuit Programming=====
===== In Circuit Programming eFuse =====
<br />
==Reference==
