Difference between revisions of "LMS-6 Radiosonde"

From RECESSIM, A Reverse Engineering Community
Jump to navigation Jump to search
(Initial entry, specs, some connectors, CPU/RF chip)
(No difference)

Revision as of 01:49, 2 September 2020

The LMS-6 Radiosonde is a radiosonde manufactured by Lockheed-Martin Sippican, and used for meteorological sounding.


Overview

There are two models of the LMS-6, a 403MHz model and a 1680MHz model. This article will cover the 403MHz model unless specified.

Specs

  • 16 Fixed transmit carrier frequencies (MHz): 400.250, 400.625, 401.000, 401.375, 401.750, 402.125, 402.500, 402.875, 403.250, 403.625, 404.000, 404.375, 404.750, 405.125, 405.500, 405.875
  • Frequency tolerance +/-30ppm
  • Mean TX Power 70.8mW (18.5dBm)
  • Emission Designator 16K8F1D
  • FSK with a maximum modulating frequency of 4.8 kHz
  • Emission 3dB BW +/-5.0 kHz
  • Emission 20dB BW +/-12.7 kHz
  • Omnidirectional antenna
  • Main beam gain 2dBi
  • Horizontal Beamwidth 360 degrees
  • Vertical Beamwidth +84 degrees

Source: https://apps.fcc.gov/els/GetAtt.html?id=121623&x=.

Photos


Connectors

sens 1 - NC (7-pin) (baro?)

sens 2 - RH

sens 3 - standalone TC

sens 4 - RH TC

Card edge - 40-pin, looks like ISA spacing

J1 - 4 pin 0.1

- 1 - Black

- 2 - White

- 3 - Red

- 4 - NC

J4 - NC - earphone jack? uses SENS3 leads

J5 - 4-pin 0.1 - to U3 (STM)

SP1 - 2x4pin 0.1 - tu U14 (SPI mem?)

Components

GPS - Trimble 63530-50 s/n 1190122906

   https://www.trimble.com/embeddedsystems/copernicus2.aspx


U3 - 72F324J6T6 - ST72324 - Main Microcontroller, ST7 series

U21 - TI/Chipcon CC1050 (TSSOP 24)

Circuits

RF from CC to Ant1 - coming soon