Changes

This image from the book "Product Integrity and Reliability in Design" appears to be a schematic of the Model 250.<br />[[File:John W. Evans, Jillian Y. Evans, Dong-su Ryu (auth.), John W. Evans, Jillian Y. Evans (eds.) - Product Integrity and Reliability in Design-Springer-Verlag London (2001).jpg]]<br /><gallery mode="packed">File:BG International Decapsulator Model 250.png|Decapsulator on the left and control box on the right. Control box contains all microprocessors and control logic.File:BG Model 250 Front.JPG|Decapsulator with top and side covers removed.File:BG Model 250 Rear.JPG|Decapsulator rear with hose attached to Nitrogen port. DB25 and power connector seen on the right. Holes on the left had Swagelok connectors that were removed and PTFE tube run straight from internal ports to external containers.File:BG Model 250 Top Regulators.JPG|Pressure regulators at the bottom of the image to regulate Nitrogen used to control acid valves and large cylinder that opens/closes chamber.File:BG Model 250 Side 1.JPGFile:BG Model 250 Side 2.JPGFile:BG Model 250 Top Chamber.JPGFile:BG Model 250 Side 1 Top.JPGFile:BG Model 250 Side 2 Cylinder.JPGFile:BG Model 250 Side 2 Valve.JPGFile:BG Model 250 Side 1 Vent Valve.JPGFile:BG Model 250 Side 2 Cylinder Valve.JPG</gallery><br />